• 646 Citations
20052020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Mechanical response and microstructure evolution of commercially pure titanium subjected to Repetitive Bending under Tension

Tamimi, S., Sivaswamy, G., Siddiq, M. A., Leacock, A. & Blackwell, P., 19 May 2020, In : Materials & Design.

Research output: Contribution to journalArticle

Open Access

Modelling Hydrogen Induced Stress Corrosion Cracking in Austenitic Stainless Steel

Ogosi, E. I., Asim, U. B., Siddiq, M. A. & Kartal, M. E., Apr 2020, In : Journal of Mechanics. 36, 2, p. 213-222 10 p.

Research output: Contribution to journalArticle

2019
4 Citations (Scopus)
Open Access
File
5 Citations (Scopus)
8 Downloads (Pure)
Open Access
File
7 Citations (Scopus)
1 Downloads (Pure)
2018

Design and validation of a fixture for positive incremental sheet forming

Ur Rehman Siddiqi, M., Corney, J. R., Sivaswamy, G., Amir, M. & Bhattacharya, R., 1 Mar 2018, In : The Journal of Engineering Manufacture. 232, 4, p. 629-643 15 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Hydrogen effect on plastic deformation and void growth in austenitic stainless steel

Ogosi, E. I., Asim, U. B., Siddiq, M. A. & Kartal, M. E., 2018.

Research output: Contribution to conferencePaper

RVE based crystal plasticity study of void growth on phase boundary in titanium alloys

Asim, U. B., Siddiq, M. A. & Kartal, M. E., 2018.

Research output: Contribution to conferencePaper

2017

A Thermomechanical Approach of Modeling Martensitic Transformation Using Crystal Plasticity Theory

Khan, R., Siddiq, M. A., Asim, U. B. & Abdelghaffar, A., 2017.

Research output: Contribution to conferenceAbstract

Smooth particle hydrodynamics study of surface defect machining for diamond turning of silicon

Mir, A., Luo, X. & Siddiq, A., 1 Feb 2017, In : The International Journal of Advanced Manufacturing Technology . 88, 9, p. 2461–2476 16 p.

Research output: Contribution to journalArticle

Open Access
File
12 Citations (Scopus)
7 Downloads (Pure)

Three-dimensional in situ observations of compressive damage mechanisms in syntactic foam using X-ray microcomputed tomography

Kartal, M. E., Dugdale, L. H., Harrigan, J. J., Siddiq, M. A., Pokrajac, D. & Mulvihill, D. M., Sep 2017, In : Journal of Materials Science. 52, 17, p. 10186-10197 11 p.

Research output: Contribution to journalArticle

Open Access
File
5 Citations (Scopus)
6 Downloads (Pure)

Void growth in high strength aluminium alloy single crystals: A CPFEM based study

Asim, U., Siddiq, M. A. & Demiral, M., 2 Mar 2017, In : Modelling and Simulation in Materials Science and Engineering. 25, 3, 19 p., 035010.

Research output: Contribution to journalArticle

Open Access
File
8 Citations (Scopus)
8 Downloads (Pure)
2016

A Crystal Plasticity Finite Element Method (CPFEM) based study to investigate the effect of microvoids in single crystalline aluminium alloy

Siddiq, M. A. & Asim, U. B., 2016, Proceedings of the 24th UK Conference of the Association for Computational Mechanics in Engineering. AMCE, 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crystal Plasticity based Finite Element Analysis of Void Growth in High Strength Alloys

Asim, U. B., Siddiq, M. A. & Kartal, M. E., 2016.

Research output: Contribution to conferencePaper

Modelling of Stress-Corrosion Cracking by Using Peridynamics

De Meo, D., Diyaroglu, C., Zhu, N., Oterkus, E. & Siddiq, M. A., 27 Apr 2016, In : International Journal of Hydrogen Energy. 41, 15, p. 6593-6609 17 p.

Research output: Contribution to journalArticle

Open Access
File
39 Citations (Scopus)
8 Downloads (Pure)

Niobium/alumina bicrystal interface fracture

Siddiq, A., Schmauder, S. & Rühle, M., 2016, Multiscale Materials Modeling : Approaches to Full Multiscaling. Schmauder, S. & Schäfer, I. (eds.). Walter de Gruyter, p. 135–150 16 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Peridynamic modeling of composite laminates under explosive loading

Diyaroglua, C., Oterkus, E., Madenci, E., Rabczuk, T. & Siddiq, A., 1 Jun 2016, In : Composite Structures. 144, p. 14-23 10 p.

Research output: Contribution to journalArticle

Open Access
File
36 Citations (Scopus)
5 Downloads (Pure)

Void Growth in Aluminium Alloys – A CPFEM based study

Asim, U. B. & Siddiq, M. A., 2016.

Research output: Contribution to conferencePaper

2015

A multiscale phenomenological constitutive model for strain rate dependent tensile ductility in nanocrystalline metals

Siddiq, M. A. & El Sayed, T., 1 Mar 2015, In : Materials Letters. 142, p. 60-63 4 p.

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)
5 Downloads (Pure)

A numerical investigation on the effect of tool geometry in single point diamond turning of silicon

Amir, M. & Mir, A., 2015, Proceedings of the 15th International Conference of European Society for Precision Engineering and Nanotechnology, EUSPEN 2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental Study of Incremental Sheet Forming Process using CPTi

Ur Rehman Siddiqi, M., Corney, J., Amir, M., Bhattacharya, R. & Sivaswamy, G., 2015, Proceedings of the 13th World Conference on Titanium. Wiley

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Incremental Sheet Forming Fixture Design and Implementation

Ur Rehman Siddiqi, M., Corney, J., Sivaswamy, G., Amir, M. & Bhatacharya, R., 2015.

Research output: Contribution to conferencePaper

Multiphysics modelling of Stress Corrosion Cracking by using peridynamics

De Meo, D., Diyaroglu, C., Zhu, N., Oterkus, E. & Amir, M., 2015, Analysis and Design of Marine Structures V. Guedes Soares, C. & Shenoi, R. A. (eds.). CRC Press, p. 499-504 6 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)

Multiscale deformation and failure in aluminium alloy 6082-T6: Experiments and Modelling

Alsawy, A. B. H. & Amir, M., 2015.

Research output: Contribution to conferencePaper

Numerical simulation of triaxial tests to determine the Drucker-Prager parameters of silicon

Mir, A., Luo, X. & Amir, M., 2015, 21st International Conference on Automation and Computing, UK. IEEE Explore

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Complex Incremental Sheet Forming Using Back Die Support on Aluminium 2024, 5083 and 7075 alloys

Devarajan, N., Sivaswamy, G., Bhattacharya, R., Heck, D. P. & Amir, M., 2014, In : Procedia Engineering. 81, p. 2298-2304 7 p.

Research output: Contribution to journalArticle

Open Access
File
12 Citations (Scopus)
8 Downloads (Pure)

Improvement in ductility in commercially pure titanium alloys by stress relaxation at room temperature

Eipert, I., Sivaswamy, G., Bhattacharya, R., Amir, M. & Blackwell, P., 1 Jan 2014, Key Engineering Materials. Larkiola, J. (ed.). Trans Tech Publications Ltd, Vol. 611-612. p. 92-98 7 p. (Key Engineering Materials; vol. 611-612).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

12 Citations (Scopus)
2013
Open Access
File
1 Citation (Scopus)
7 Downloads (Pure)

A phenomenological variational multiscale constitutive model for intergranular failure in nanocrystalline materials

Siddiq, A., El Sayed, T. & Amir, M., 15 Sep 2013, In : Materials Letters. 107, p. 56-59 4 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Ultrasonic consolidation: multiscale models and numerical simulations

Amir, M., 2013, p. 1-8. 8 p.

Research output: Contribution to conferencePaper

2012

A phenomenological two-phase constitutive model for porous shape memory alloys

Sayed, T. E., Gürses, E. & Siddiq, A., 1 Jul 2012, In : Computational Materials Science. 60, p. 44-52 9 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)

A thermomechanical crystal plasticity constitutive model for ultrasonic consolidation

Sayed, T. E. & Siddiq, A., 1 Jan 2012, In : Computational Materials Science. 51, 1, p. 241-251 11 p.

Research output: Contribution to journalArticle

33 Citations (Scopus)

A variational void coalescence model for ductile metals

Siddiq, A., Arciniega, R. & El Sayed, T., 1 Feb 2012, In : Computational Particle Mechanics. 49, 2, p. 185-195 11 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Ultrasonic-assisted manufacturing processes: variational model and numerical simulations

Siddiq, A. & El Sayed, T., 1 Apr 2012, In : Ultrasonics. 52, 4, p. 521-529 9 p.

Research output: Contribution to journalArticle

68 Citations (Scopus)
2011

Acoustic softening in metals during ultrasonic assisted deformation via CP-FEM

Siddiq, A. & Sayed, T. E., 31 Jan 2011, In : Materials Letters. 65, 2, p. 356-359 4 p.

Research output: Contribution to journalArticle

79 Citations (Scopus)

A microscale thermomechanical constitutive model for ultrasonic consolidation processes

Amir, M. & El Sayed, T., Jul 2011.

Research output: Contribution to conferencePaper

14 Citations (Scopus)

Finite element analysis of ultrasonic insertion of SiC fibre in aluminium alloy 6061

Ghassemieh, E. & Siddiq, A., 1 Oct 2011, In : International Journal of Materials Engineering Innovation. 2, 3-4, p. 182-202 21 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Simulation of peel test of ultrasonic consolidated metal structures using cohesive model

Siddiq, A. & Ghassemieh, E., Sep 2011.

Research output: Contribution to conferencePaper

2010

Multiscale simulation of metal/ceramic interface fracture

Siddiq, A. & Schmauder, S., 2010, IUTAM Symposium on Multi-Functional Material Structures and Systems. Dattaguru, B., Gopalakrishnan, S. & Aatre, V. K. (eds.). Springer , Vol. 19. p. 343-355 13 p. (IUTAM Bookseries; vol. 19).

Research output: Chapter in Book/Report/Conference proceedingChapter (peer-reviewed)

2 Citations (Scopus)
2009

Fiber push-out study of a copper matrix composite with an engineered interface: Experiments and cohesive element simulation

You, J. H., Lutz, W., Gerger, H., Siddiq, A., Brendel, A., Höschen, C., Schmauder, S. & Amir, M., 15 Dec 2009, In : International Journal of Solids and Structures. 46, 25-26, p. 4277-4286 10 p.

Research output: Contribution to journalArticle

25 Citations (Scopus)

Microstructural analysis of ultrasonic welded AA6061 by electron backscattered diffraction

Amir, M., Ghassemieh, E., Zhu, Z. & Wynne, B., 2009, In : Rare Metal Materials and Engineering. 38, p. 147-151 5 p.

Research output: Contribution to journalArticle

Theoretical and FE analysis of ultrasonic welding of aluminum alloy 3003

Siddiq, A., Ghassemieh, E. & Amir, M., 1 Aug 2009, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 131, 4, p. 0410071-04100711 3690641 p.

Research output: Contribution to journalArticle

48 Citations (Scopus)

Ultrasonic welding in implanting reinforcing fibre in aluminum matrices

Amir, M. & Ghassemieh, E., 2009.

Research output: Contribution to conferencePaper

2008

Modelling and characterization of ultrasonic consolidation process of Aluminium alloys

Siddiq, A. & Ghassemieh, E., 1 Dec 2008, Materials Research Society Symposium Proceedings. Vol. 1079. p. 125-132 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Multiscale modelling of interface fracture

Amir, M. & Schmauder, S., May 2008.

Research output: Contribution to conferencePaper

Niobium/alumina bicrystal interface fracture: a theoretical interlink between local adhesion capacity and macroscopic fracture energies

Siddiq, A., Schmauder, S. & Ruehle, M., 1 May 2008, In : Engineering Fracture Mechanics. 75, 8, p. 2320-2332 13 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Simulation of ultrasonic welding of fibre elements in metal matrices

Siddiq, A. & Ghassemieh, E., 2008.

Research output: Contribution to conferencePaper