• 509 Citations
20042020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article
2020

Modelling Hydrogen Induced Stress Corrosion Cracking in Austenitic Stainless Steel

Ogosi, E. I., Asim, U. B., Siddiq, M. A. & Kartal, M. E., Apr 2020, In : Journal of Mechanics. 36, 2, p. 213-222 10 p.

Research output: Contribution to journalArticle

The influence of pulsed laser powder bed fusion process parameters on Inconel 718 material properties

Georgilas, K., Khan, R. H. U. & Kartal, M. E., 2 Jan 2020, In : Materials Science and Engineering A. 769, 9 p., 138527.

Research output: Contribution to journalArticle

3 Citations (Scopus)
2019
Open Access
File
4 Citations (Scopus)
Open Access
File
7 Citations (Scopus)
1 Downloads (Pure)
2018

Contribution of finite element analyses to crack-like flaw assessments in a gas pipeline

Thibault, J., Kartal, M. E., Du Suau, G. & Hertz-Clémens, S., Mar 2018, In : International Journal of Pressure Vessels and Piping. 161, p. 41-49 9 p.

Research output: Contribution to journalArticle

Open Access
File
4 Citations (Scopus)
4 Downloads (Pure)

The inclusion of short-transverse displacements in the eigenstrain reconstruction of residual stress and distortion in in740h weldments

Uzun, F., Everaerts, J., Brandt, L., Kartal, M. E., Salvati, E. & Korsunsky, A. M., 31 Dec 2018, In : Journal of Manufacturing Processes. 36, p. 601-612 12 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
2017

Three-dimensional in situ observations of compressive damage mechanisms in syntactic foam using X-ray microcomputed tomography

Kartal, M. E., Dugdale, L. H., Harrigan, J. J., Siddiq, M. A., Pokrajac, D. & Mulvihill, D. M., Sep 2017, In : Journal of Materials Science. 52, 17, p. 10186-10197 11 p.

Research output: Contribution to journalArticle

Open Access
File
6 Citations (Scopus)
6 Downloads (Pure)
2016

The effect of specimen size and surface conditions on the local mechanical properties of 14MoV6 ferritic–pearlitic steel

Molak, R. M., Kartal, M. E., Pakiela, Z. & Kurzydlowski, K. J., 10 Jan 2016, In : Materials Science and Engineering A. 651, p. 810-821 12 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

The Influence of Welding Procedure and Plate Geometry on Residual Stresses in Thick Components

Kartal, M. E., Kang, Y-H., Korsunsky, A. M., Cocks, A. C. F. & Bouchard, J. P., Feb 2016, In : International Journal of Solids and Structures. 80, p. 420-429 10 p.

Research output: Contribution to journalArticle

33 Citations (Scopus)
2015
21 Citations (Scopus)
2014

Effects of crystallographic orientation and grain morphology on crack tip stress state and plasticity

Kartal, M. E., Cuddihy, M. A. & Dunne, F. P. E., Apr 2014, In : International journal of fatigue. 61, 46-58, p. 46-58 13 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)
2013

A comparison of contact stiffness measurements obtained by the digital image correlation and ultrasound techniques

Mulvihill, D. M., Brunskill, H., Kartal, M. E., Dwyer-Joyce, R. S. & Nowell, D., 1 Sep 2013, In : Experimental Mechanics. 53, 7, p. 1245-1263 19 p.

Research output: Contribution to journalArticle

21 Citations (Scopus)
10 Citations (Scopus)

Characterisation of crack tip fields under non-uniform fatigue loading

Nowell, D., Kartal, M. E. & De Matos, P. F. P., 1 Jan 2013, In : Frattura ed Integrità Strutturale. 25, 7, p. 1-6 6 p.

Research output: Contribution to journalArticle

Open Access
File
5 Downloads (Pure)
26 Citations (Scopus)
2012

Determination of the complete microscale residual stress tensor at a subsurface carbide particle in a single-crystal superalloy from free-surface EBSD

Kartal, M. E., Dunne, F. P. E. & Wilkinson, A. J., Aug 2012, In : Acta Materialia. 60, 13-14, p. 5300-5310 11 p.

Research output: Contribution to journalArticle

21 Citations (Scopus)
2011

An elastic–plastic asperity interaction model for sliding friction

Mulvihill, D. M., Kartal, M. E., Nowell, D. & Hills, D. A., Nov 2011, In : Tribology International. 44, 12, p. 1679-1694 16 p.

Research output: Contribution to journalArticle

61 Citations (Scopus)

Determination of the frictional properties of titanium and nickel alloys using the digital image correlation method

Kartal, M. E., Mulvihill, D. M., Nowell, D. & Hills, D. A., 1 Mar 2011, In : Experimental Mechanics. 51, 3, p. 359-371 13 p.

Research output: Contribution to journalArticle

30 Citations (Scopus)

Investigation of non-Coulomb friction behaviour in reciprocating sliding

Mulvihill, D. M., Kartal, M. E., Nowell, D. & Hills, D. A., 22 Jun 2011, In : Wear. 271, 5, p. 802-816 15 p.

Research output: Contribution to journalArticle

35 Citations (Scopus)

Investigation of the friction variation with sliding which is commonly observed in individual fretting test cycles

Mulvihill, D. M., Kartal, M. E., Nowell, D. & Hills, D. A., 8 Sep 2011, In : Applied Mechanics and Materials. 70, p. 213-218 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Measurement of tangential contact stiffness in frictional contacts: the effect of normal pressure

Kartal, M. E., Mulvihill, D. M., Nowell, D. & Hills, D. A., 8 Sep 2011, In : Applied Mechanics and Materials. 70, p. 321-326 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Measurements of pressure and area dependent tangential contact stiffness between rough surfaces using digital image correlation

Kartal, M. E., Mulvihill, D. M., Nowell, D. & Hills, D. A., Sep 2011, In : Tribology International. 44, 10, p. 1188-1198 11 p.

Research output: Contribution to journalArticle

44 Citations (Scopus)

Partial slip problem for two semi-infinite strips in contact

Kartal, M. E., Barber, J. R., Hills, D. A. & Nowell, D., Feb 2011, In : International Journal of Engineering Science. 49, 2, p. 203-211 9 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)
2010

Torsional contact between elastically similar flat-ended cylinders

Kartal, M. E., Hills, D. A., Nowell, D. & Barber, J. R., 15 May 2010, In : International Journal of Solids and Structures. 47, 10, p. 1375-1380 6 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)
2008

Determination of the profile of the complete residual stress tensor in a VPPA weld using the multi-axial contour method

Kartal, M. E., Liljedahl, C. M. D., Gungor, S., Edwards, L. & Fitzpatrick, M. E., 30 Sep 2008, In : Acta Materialia. 56, 16, p. 4417-4428 12 p.

Research output: Contribution to journalArticle

58 Citations (Scopus)
2007

Determination of weld metal mechanical properties utilising novel tensile testing methods

Kartal, M. E., Molak, R. M., Turski, M., Gungor, S., Fitzpatrick, M. E. & Edwards, L., Aug 2007, In : Applied Mechanics and Materials. 7-8, p. 127-132 6 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Use of micro tensile test samples in determining the remnant life of pressure vessel steels

Molak, R. M., Kartal, M. E., Pakiela, Z., Manaj, W., Turski, M., Hiller, S., Gungor, S., Edwards, L. & Kurzydlowski, K. J., Aug 2007, In : Applied Mechanics and Materials. 7-8, p. 187-194 8 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)
2006

Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method

Kartal, M. E., Turski, M., Johson, G., Fitzpatrick, M. E., Gungor, S., Withers, P. J. & Edwards, L., 2006, In : Materials Science Forum. 524-525, p. 671-676 6 p.

Research output: Contribution to journalArticle

31 Citations (Scopus)
2005

Isi yükü ve merkezkaç kuvvet etkisi altindaki değişken kalinlikli uzantili yüzeylerde deformasyon analizi

Translated title of the contribution: DEFORMATION ANALYSIS OF VARIABLE THICKNESS FINS SUBJECTED TO HEATING AND CENTRIFUGATIONEraslan, A. N. & Kartal, M. E., 2005, In : Journal of the Faculty of Engineering and Architecture of Gazi University. 20, 3, p. 379-385 7 p.

Research output: Contribution to journalArticle

Stress distributions in cooling fins of variable thickness with and without rotation

Eraslan, A. N. & Kartal, M. E., 1 Aug 2005, In : Journal of Thermal Stresses. 28, 8, p. 861-883 23 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)