Assessment of the value of microgravity to estimate the principal directions of the anisotropic transmissivity of aquifers from pumping tests: A study using a Hough transform based automatic algorithm

José Paulino Fernández-Álvarez (Corresponding Author), Andrés González-Quirós, David Rubio-Melendi

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

Estimation of the hydraulic parameters of an aquifer is usually performed via interpretation of pumping tests. This invasive method requires drilling both pumping and observation wells. As the process is expensive, only a single pumping well and one or two observation wells or piezometers are generally drilled, at most. The interpretation is done assuming aquifer isotropy and homogeneity. However, in many aquifers, horizontal anisotropy in hydraulic conductivity greatly affects the flow regime. Its disregard may lead to important misinterpretations, especially for environmental impact assessments. This paper studies the capabilities of gravity for the identification and determination of the principal directions of anisotropy. This has been automatized using a methodology based on the Hough Transform. The results show how a microgravity survey could be an adequate and relatively cheap monitoring tool for the identification of anisotropy. This is valuable information that can be used in the decision making process for performing or discarding additional studies. Even more, the presented methodology can be extended to other studies in which contour maps are used to identify directionality in any process or property.
Original languageEnglish
Pages (from-to)172-182
Number of pages11
JournalJournal of Applied Geophysics
Volume134
Early online date18 Sep 2016
DOIs
Publication statusPublished - 1 Nov 2016

Fingerprint

transmissivity
aquifers
microgravity
pumping
anisotropy
transform
aquifer
well
hydraulics
estimates
piezometers
methodology
isotropy
piezometer
contour map
decision making
environmental impact assessment
drilling
homogeneity
hydraulic conductivity

Keywords

  • Gravity
  • Horizontal anisotropy
  • Hough transform
  • Hydrogeophysics
  • Pumping tests

Cite this

Assessment of the value of microgravity to estimate the principal directions of the anisotropic transmissivity of aquifers from pumping tests : A study using a Hough transform based automatic algorithm. / Fernández-Álvarez, José Paulino (Corresponding Author); González-Quirós, Andrés; Rubio-Melendi, David.

In: Journal of Applied Geophysics, Vol. 134, 01.11.2016, p. 172-182.

Research output: Contribution to journalArticle

@article{da936bae40c549f8a5669d927444bdb0,
title = "Assessment of the value of microgravity to estimate the principal directions of the anisotropic transmissivity of aquifers from pumping tests: A study using a Hough transform based automatic algorithm",
abstract = "Estimation of the hydraulic parameters of an aquifer is usually performed via interpretation of pumping tests. This invasive method requires drilling both pumping and observation wells. As the process is expensive, only a single pumping well and one or two observation wells or piezometers are generally drilled, at most. The interpretation is done assuming aquifer isotropy and homogeneity. However, in many aquifers, horizontal anisotropy in hydraulic conductivity greatly affects the flow regime. Its disregard may lead to important misinterpretations, especially for environmental impact assessments. This paper studies the capabilities of gravity for the identification and determination of the principal directions of anisotropy. This has been automatized using a methodology based on the Hough Transform. The results show how a microgravity survey could be an adequate and relatively cheap monitoring tool for the identification of anisotropy. This is valuable information that can be used in the decision making process for performing or discarding additional studies. Even more, the presented methodology can be extended to other studies in which contour maps are used to identify directionality in any process or property.",
keywords = "Gravity, Horizontal anisotropy, Hough transform, Hydrogeophysics, Pumping tests",
author = "Fern{\'a}ndez-{\'A}lvarez, {Jos{\'e} Paulino} and Andr{\'e}s Gonz{\'a}lez-Quir{\'o}s and David Rubio-Melendi",
year = "2016",
month = "11",
day = "1",
doi = "10.1016/j.jappgeo.2016.09.015",
language = "English",
volume = "134",
pages = "172--182",
journal = "Journal of Applied Geophysics",
issn = "0926-9851",
publisher = "Elsevier Science B. V.",

}

TY - JOUR

T1 - Assessment of the value of microgravity to estimate the principal directions of the anisotropic transmissivity of aquifers from pumping tests

T2 - A study using a Hough transform based automatic algorithm

AU - Fernández-Álvarez, José Paulino

AU - González-Quirós, Andrés

AU - Rubio-Melendi, David

PY - 2016/11/1

Y1 - 2016/11/1

N2 - Estimation of the hydraulic parameters of an aquifer is usually performed via interpretation of pumping tests. This invasive method requires drilling both pumping and observation wells. As the process is expensive, only a single pumping well and one or two observation wells or piezometers are generally drilled, at most. The interpretation is done assuming aquifer isotropy and homogeneity. However, in many aquifers, horizontal anisotropy in hydraulic conductivity greatly affects the flow regime. Its disregard may lead to important misinterpretations, especially for environmental impact assessments. This paper studies the capabilities of gravity for the identification and determination of the principal directions of anisotropy. This has been automatized using a methodology based on the Hough Transform. The results show how a microgravity survey could be an adequate and relatively cheap monitoring tool for the identification of anisotropy. This is valuable information that can be used in the decision making process for performing or discarding additional studies. Even more, the presented methodology can be extended to other studies in which contour maps are used to identify directionality in any process or property.

AB - Estimation of the hydraulic parameters of an aquifer is usually performed via interpretation of pumping tests. This invasive method requires drilling both pumping and observation wells. As the process is expensive, only a single pumping well and one or two observation wells or piezometers are generally drilled, at most. The interpretation is done assuming aquifer isotropy and homogeneity. However, in many aquifers, horizontal anisotropy in hydraulic conductivity greatly affects the flow regime. Its disregard may lead to important misinterpretations, especially for environmental impact assessments. This paper studies the capabilities of gravity for the identification and determination of the principal directions of anisotropy. This has been automatized using a methodology based on the Hough Transform. The results show how a microgravity survey could be an adequate and relatively cheap monitoring tool for the identification of anisotropy. This is valuable information that can be used in the decision making process for performing or discarding additional studies. Even more, the presented methodology can be extended to other studies in which contour maps are used to identify directionality in any process or property.

KW - Gravity

KW - Horizontal anisotropy

KW - Hough transform

KW - Hydrogeophysics

KW - Pumping tests

U2 - 10.1016/j.jappgeo.2016.09.015

DO - 10.1016/j.jappgeo.2016.09.015

M3 - Article

VL - 134

SP - 172

EP - 182

JO - Journal of Applied Geophysics

JF - Journal of Applied Geophysics

SN - 0926-9851

ER -