Impact of ZnO and CuO nanoparticles on the rheological and filtration properties of water-based drilling fluid

Pitchayut Dejtaradon, Hossein Hamidi (Corresponding Author), Michael Halim Chuks, David Wilkinson, Roozbeh Rafati

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

During the past decade, many researchers have reported on various improvements to water-based drilling fluid properties through the addition of different nanoparticles to improve the rheological properties, the thermal and electrical conductivity, and fluid loss control. Although various types of nanoparticles have been tested for their ability to improve the rheological and filtration properties of water-based drilling fluids at low pressure and temperature, some of them have not yet been tested at elevated pressure and temperature. In this study, the impact of different concentrations of ZnO and CuO nanoparticle additives on the rheological properties of a water-based drilling fluid at 25oC, 50oC and 80oC, and on the filtration properties at 500 psi and 100oC was studied. A range of ZnO and CuO nanoparticle concentrations, from 0.1 to 1 wt%, were prepared as nanofluids and introduced as additives (1 vol%) into prepared water-based base drilling fluids. The rheological properties for both nanoparticle-based drilling fluids showed a significant improvement over the base drilling fluid, with ZnO providing a better overall performance than CuO. Both nanoparticle-based drilling fluids were also observed to be more stable at elevated temperatures. For the filtration tests conducted under elevated pressure and temperature conditions (500 psi and 100oC), a greater reduction in filtration loss was obtained at 0.8 wt% CuO nanoparticles (30.2%), compared to 0.8 wt% ZnO nanoparticles (18.6%). Mud cake thickness was also reduced, compared to the base fluid, with the CuO (27.6%) and ZnO (24.6%) nanoparticle fluids. These results demonstrate the ability of ZnO and CuO nanoparticles to enhance the properties of water-based drilling fluids, and their potential to be used as a high-efficiency filtration loss additive.
Original languageEnglish
Pages (from-to)354-367
Number of pages14
JournalColloids and Surfaces. A, Physicochemical and Engineering Aspects
Volume570
Early online date18 Mar 2019
DOIs
Publication statusPublished - 5 Jun 2019

Fingerprint

Drilling fluids
drilling
Nanoparticles
nanoparticles
Water
fluids
water
Fluids
Temperature
mud
Thermal conductivity
temperature
thermal conductivity
low pressure

Keywords

  • water-based drilling fluids
  • ZnO nanoparticles
  • CuO nanoparticles
  • pressure
  • temperature
  • rheological properties
  • filtration properties
  • Water-based drilling fluids
  • Temperature
  • Filtration properties
  • Pressure
  • Rheological properties
  • OXIDE
  • PERFORMANCE
  • NANOFLUIDS
  • DEEP
  • MUDS
  • TEMPERATURE

ASJC Scopus subject areas

  • Surfaces and Interfaces
  • Physical and Theoretical Chemistry
  • Colloid and Surface Chemistry

Cite this

Impact of ZnO and CuO nanoparticles on the rheological and filtration properties of water-based drilling fluid. / Dejtaradon, Pitchayut; Hamidi, Hossein (Corresponding Author); Halim Chuks, Michael; Wilkinson, David; Rafati, Roozbeh.

In: Colloids and Surfaces. A, Physicochemical and Engineering Aspects, Vol. 570, 05.06.2019, p. 354-367.

Research output: Contribution to journalArticle

@article{9647e0b6bf6b45bda4cfbfed4fb5fb11,
title = "Impact of ZnO and CuO nanoparticles on the rheological and filtration properties of water-based drilling fluid",
abstract = "During the past decade, many researchers have reported on various improvements to water-based drilling fluid properties through the addition of different nanoparticles to improve the rheological properties, the thermal and electrical conductivity, and fluid loss control. Although various types of nanoparticles have been tested for their ability to improve the rheological and filtration properties of water-based drilling fluids at low pressure and temperature, some of them have not yet been tested at elevated pressure and temperature. In this study, the impact of different concentrations of ZnO and CuO nanoparticle additives on the rheological properties of a water-based drilling fluid at 25oC, 50oC and 80oC, and on the filtration properties at 500 psi and 100oC was studied. A range of ZnO and CuO nanoparticle concentrations, from 0.1 to 1 wt{\%}, were prepared as nanofluids and introduced as additives (1 vol{\%}) into prepared water-based base drilling fluids. The rheological properties for both nanoparticle-based drilling fluids showed a significant improvement over the base drilling fluid, with ZnO providing a better overall performance than CuO. Both nanoparticle-based drilling fluids were also observed to be more stable at elevated temperatures. For the filtration tests conducted under elevated pressure and temperature conditions (500 psi and 100oC), a greater reduction in filtration loss was obtained at 0.8 wt{\%} CuO nanoparticles (30.2{\%}), compared to 0.8 wt{\%} ZnO nanoparticles (18.6{\%}). Mud cake thickness was also reduced, compared to the base fluid, with the CuO (27.6{\%}) and ZnO (24.6{\%}) nanoparticle fluids. These results demonstrate the ability of ZnO and CuO nanoparticles to enhance the properties of water-based drilling fluids, and their potential to be used as a high-efficiency filtration loss additive.",
keywords = "water-based drilling fluids, ZnO nanoparticles, CuO nanoparticles, pressure, temperature, rheological properties, filtration properties, Water-based drilling fluids, Temperature, Filtration properties, Pressure, Rheological properties, OXIDE, PERFORMANCE, NANOFLUIDS, DEEP, MUDS, TEMPERATURE",
author = "Pitchayut Dejtaradon and Hossein Hamidi and {Halim Chuks}, Michael and David Wilkinson and Roozbeh Rafati",
note = "The authors would like to gratefully acknowledge the School of Engineering, University of Aberdeen, Aberdeen, Scotland, United Kingdom, for the provision of the laboratory facilities necessary for completing this work. We also wish to thank John Still for his assistance with the SEM under a very short notice.",
year = "2019",
month = "6",
day = "5",
doi = "10.1016/j.colsurfa.2019.03.050",
language = "English",
volume = "570",
pages = "354--367",
journal = "Colloids and Surfaces. A, Physicochemical and Engineering Aspects",
issn = "0927-7757",
publisher = "Elsevier",

}

TY - JOUR

T1 - Impact of ZnO and CuO nanoparticles on the rheological and filtration properties of water-based drilling fluid

AU - Dejtaradon, Pitchayut

AU - Hamidi, Hossein

AU - Halim Chuks, Michael

AU - Wilkinson, David

AU - Rafati, Roozbeh

N1 - The authors would like to gratefully acknowledge the School of Engineering, University of Aberdeen, Aberdeen, Scotland, United Kingdom, for the provision of the laboratory facilities necessary for completing this work. We also wish to thank John Still for his assistance with the SEM under a very short notice.

PY - 2019/6/5

Y1 - 2019/6/5

N2 - During the past decade, many researchers have reported on various improvements to water-based drilling fluid properties through the addition of different nanoparticles to improve the rheological properties, the thermal and electrical conductivity, and fluid loss control. Although various types of nanoparticles have been tested for their ability to improve the rheological and filtration properties of water-based drilling fluids at low pressure and temperature, some of them have not yet been tested at elevated pressure and temperature. In this study, the impact of different concentrations of ZnO and CuO nanoparticle additives on the rheological properties of a water-based drilling fluid at 25oC, 50oC and 80oC, and on the filtration properties at 500 psi and 100oC was studied. A range of ZnO and CuO nanoparticle concentrations, from 0.1 to 1 wt%, were prepared as nanofluids and introduced as additives (1 vol%) into prepared water-based base drilling fluids. The rheological properties for both nanoparticle-based drilling fluids showed a significant improvement over the base drilling fluid, with ZnO providing a better overall performance than CuO. Both nanoparticle-based drilling fluids were also observed to be more stable at elevated temperatures. For the filtration tests conducted under elevated pressure and temperature conditions (500 psi and 100oC), a greater reduction in filtration loss was obtained at 0.8 wt% CuO nanoparticles (30.2%), compared to 0.8 wt% ZnO nanoparticles (18.6%). Mud cake thickness was also reduced, compared to the base fluid, with the CuO (27.6%) and ZnO (24.6%) nanoparticle fluids. These results demonstrate the ability of ZnO and CuO nanoparticles to enhance the properties of water-based drilling fluids, and their potential to be used as a high-efficiency filtration loss additive.

AB - During the past decade, many researchers have reported on various improvements to water-based drilling fluid properties through the addition of different nanoparticles to improve the rheological properties, the thermal and electrical conductivity, and fluid loss control. Although various types of nanoparticles have been tested for their ability to improve the rheological and filtration properties of water-based drilling fluids at low pressure and temperature, some of them have not yet been tested at elevated pressure and temperature. In this study, the impact of different concentrations of ZnO and CuO nanoparticle additives on the rheological properties of a water-based drilling fluid at 25oC, 50oC and 80oC, and on the filtration properties at 500 psi and 100oC was studied. A range of ZnO and CuO nanoparticle concentrations, from 0.1 to 1 wt%, were prepared as nanofluids and introduced as additives (1 vol%) into prepared water-based base drilling fluids. The rheological properties for both nanoparticle-based drilling fluids showed a significant improvement over the base drilling fluid, with ZnO providing a better overall performance than CuO. Both nanoparticle-based drilling fluids were also observed to be more stable at elevated temperatures. For the filtration tests conducted under elevated pressure and temperature conditions (500 psi and 100oC), a greater reduction in filtration loss was obtained at 0.8 wt% CuO nanoparticles (30.2%), compared to 0.8 wt% ZnO nanoparticles (18.6%). Mud cake thickness was also reduced, compared to the base fluid, with the CuO (27.6%) and ZnO (24.6%) nanoparticle fluids. These results demonstrate the ability of ZnO and CuO nanoparticles to enhance the properties of water-based drilling fluids, and their potential to be used as a high-efficiency filtration loss additive.

KW - water-based drilling fluids

KW - ZnO nanoparticles

KW - CuO nanoparticles

KW - pressure

KW - temperature

KW - rheological properties

KW - filtration properties

KW - Water-based drilling fluids

KW - Temperature

KW - Filtration properties

KW - Pressure

KW - Rheological properties

KW - OXIDE

KW - PERFORMANCE

KW - NANOFLUIDS

KW - DEEP

KW - MUDS

KW - TEMPERATURE

UR - http://www.scopus.com/inward/record.url?scp=85063028688&partnerID=8YFLogxK

UR - http://www.mendeley.com/research/impact-zno-cuo-nanoparticles-rheological-filtration-properties-waterbased-drilling-fluid

U2 - 10.1016/j.colsurfa.2019.03.050

DO - 10.1016/j.colsurfa.2019.03.050

M3 - Article

VL - 570

SP - 354

EP - 367

JO - Colloids and Surfaces. A, Physicochemical and Engineering Aspects

JF - Colloids and Surfaces. A, Physicochemical and Engineering Aspects

SN - 0927-7757

ER -