Investigation of the influence of pressures and proppant mass on the well parameters after hydraulic fracturing

V.V. Poplygin* (Corresponding Author), Ekaterina Pavlovskaia

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

This paper considers the implementation of hydraulic fracturing in an oil field located in the Arkhangelsk region in Russia. During the exploitation, the production rates and injectivity of the injection wells in the field were intensively decreased. To increase well flow rates, hydraulic fracturing of the formation was carried out, and the evaluation of the efficiency was performed. Oil production rates after the fracturing increased 3.2 times and the productivity index increased twice. The influence of the geometrical sizes of fractures on the volume of injected proppant was investigated. An increase in the mass of the injected proppant from 2 to 3 tons per 1 meter of formation thickness leads to an average increase in the crack width by 0.5 mm, and the half-length by 40 m. Well work parameters after hydraulic fracturing of a reservoir were obtained as a function of the original parameters of the reservoir. It was observed that there is a sharp decrease in well production rates after fracturing in wells with low bottom hole pressures. When the pressure at the bottom of the well decreases from 60 to 20 MPa, it leads to an average decrease in the crack width by 2 mm, and the half-length of the crack by 50 m. Direct correlation between the well productivity coefficients after fracturing and the values of bottom hole pressures was observed. The optimal conditions for fracturing were identified, which made it possible to significantly increase the efficiency of the operation.

Original languageEnglish
Pages (from-to)1066-1073
Number of pages8
JournalInternational Journal of Engineering
Volume34
Issue number4
Early online date1 Apr 2021
DOIs
Publication statusPublished - 1 Apr 2021

Keywords

  • Hydraulic fracturing
  • productivity index
  • oil production
  • permeability
  • pressure
  • Oil Production
  • Productivity Index
  • Permeability
  • Pressure
  • Hydraulic Fracturing

Fingerprint

Dive into the research topics of 'Investigation of the influence of pressures and proppant mass on the well parameters after hydraulic fracturing'. Together they form a unique fingerprint.

Cite this