Natural fractures initiation and fracture type prediction in coal reservoir under different in-situ stresses during hydraulic fracturing

Saipeng Huang, Dameng Liu, Yanbin Yao, Quan Gan, Yidong Cai*, Lulu Xu

*Corresponding author for this work

Research output: Contribution to journalArticle

18 Citations (Scopus)

Abstract

Hydraulic fracturing is one of the most effective ways of formation stimulation for enhancing coalbed methane (CBM) recovery. The fracture initiation and propagation during hydraulic fracturing is primary constrained by local stress field, hydraulic pressure magnitude, coal properties, and natural fractures. In this work, the fracture initiation region and propagation direction during hydraulic fracturing under various in-situ stresses were investigated both experimentally and numerically. For experimental study, fracturing under true tri-axial stresses was designed to determine the fracture propagation under two sets of in-situ stresses. And for numerical study, a single-fracture model was constructed by using finite element method (FEM3D) ANSYS workbench, which indicates that high lateral stress coefficient is conducive to create new compressive fractures instead of shear fractures. σH = σv or σh = σv has a great influence on the initiation location that determined by θ (from −90° to 90°) of the compressive fracture, while there is no significant influence on shear fracture. With the same σv applied, the horizontal stress difference has slightly impact on the type of newly-created fracture. The value of lateral stress coefficient that ranges from 0.35 to 1.20 decides the fracture type, which plays a crucial role in determining the stress magnitude and orientation around the fracture tip. The horizontal and vertical fracture are the main types when σvHh and σHvh respectively. The inclined fractures are possibly created in the coals with strong heterogeneity. Therefore, they can be used to predict the direction of initiation and propagation for the type of newly-created fracture during hydraulic fracturing for coalbed methane (CBM) development.

Original languageEnglish
Pages (from-to)69-80
Number of pages12
JournalJournal of Natural Gas Science & Engineering
Volume43
Early online date4 Apr 2017
DOIs
Publication statusPublished - 1 Jul 2017

Fingerprint

Hydraulic fracturing
Coal

Keywords

  • Finite element method
  • Hydraulic fracturing
  • Lateral stress coefficient
  • Natural fracture initiation

ASJC Scopus subject areas

  • Energy Engineering and Power Technology

Cite this

Natural fractures initiation and fracture type prediction in coal reservoir under different in-situ stresses during hydraulic fracturing. / Huang, Saipeng; Liu, Dameng; Yao, Yanbin; Gan, Quan; Cai, Yidong; Xu, Lulu.

In: Journal of Natural Gas Science & Engineering, Vol. 43, 01.07.2017, p. 69-80.

Research output: Contribution to journalArticle

@article{b4569e07bf274c3b974f7c2e725ab823,
title = "Natural fractures initiation and fracture type prediction in coal reservoir under different in-situ stresses during hydraulic fracturing",
abstract = "Hydraulic fracturing is one of the most effective ways of formation stimulation for enhancing coalbed methane (CBM) recovery. The fracture initiation and propagation during hydraulic fracturing is primary constrained by local stress field, hydraulic pressure magnitude, coal properties, and natural fractures. In this work, the fracture initiation region and propagation direction during hydraulic fracturing under various in-situ stresses were investigated both experimentally and numerically. For experimental study, fracturing under true tri-axial stresses was designed to determine the fracture propagation under two sets of in-situ stresses. And for numerical study, a single-fracture model was constructed by using finite element method (FEM3D) ANSYS workbench, which indicates that high lateral stress coefficient is conducive to create new compressive fractures instead of shear fractures. σH = σv or σh = σv has a great influence on the initiation location that determined by θ (from −90° to 90°) of the compressive fracture, while there is no significant influence on shear fracture. With the same σv applied, the horizontal stress difference has slightly impact on the type of newly-created fracture. The value of lateral stress coefficient that ranges from 0.35 to 1.20 decides the fracture type, which plays a crucial role in determining the stress magnitude and orientation around the fracture tip. The horizontal and vertical fracture are the main types when σv>σH>σh and σH>σv>σh respectively. The inclined fractures are possibly created in the coals with strong heterogeneity. Therefore, they can be used to predict the direction of initiation and propagation for the type of newly-created fracture during hydraulic fracturing for coalbed methane (CBM) development.",
keywords = "Finite element method, Hydraulic fracturing, Lateral stress coefficient, Natural fracture initiation",
author = "Saipeng Huang and Dameng Liu and Yanbin Yao and Quan Gan and Yidong Cai and Lulu Xu",
note = "Acknowledgements This research was funded by the National Natural Science Foundation of China (grant no. 41602170), the Fundamental Research Funds for Central Universities (grant no. 35832015136) and Key Project of Coal-based Science and Technology in Shanxi Province-CBM accumulation model and reservoir evaluation in Shanxi province (grant no. MQ2014-01).",
year = "2017",
month = "7",
day = "1",
doi = "10.1016/j.jngse.2017.03.022",
language = "English",
volume = "43",
pages = "69--80",
journal = "Journal of Natural Gas Science & Engineering",
issn = "1875-5100",
publisher = "Elsevier",

}

TY - JOUR

T1 - Natural fractures initiation and fracture type prediction in coal reservoir under different in-situ stresses during hydraulic fracturing

AU - Huang, Saipeng

AU - Liu, Dameng

AU - Yao, Yanbin

AU - Gan, Quan

AU - Cai, Yidong

AU - Xu, Lulu

N1 - Acknowledgements This research was funded by the National Natural Science Foundation of China (grant no. 41602170), the Fundamental Research Funds for Central Universities (grant no. 35832015136) and Key Project of Coal-based Science and Technology in Shanxi Province-CBM accumulation model and reservoir evaluation in Shanxi province (grant no. MQ2014-01).

PY - 2017/7/1

Y1 - 2017/7/1

N2 - Hydraulic fracturing is one of the most effective ways of formation stimulation for enhancing coalbed methane (CBM) recovery. The fracture initiation and propagation during hydraulic fracturing is primary constrained by local stress field, hydraulic pressure magnitude, coal properties, and natural fractures. In this work, the fracture initiation region and propagation direction during hydraulic fracturing under various in-situ stresses were investigated both experimentally and numerically. For experimental study, fracturing under true tri-axial stresses was designed to determine the fracture propagation under two sets of in-situ stresses. And for numerical study, a single-fracture model was constructed by using finite element method (FEM3D) ANSYS workbench, which indicates that high lateral stress coefficient is conducive to create new compressive fractures instead of shear fractures. σH = σv or σh = σv has a great influence on the initiation location that determined by θ (from −90° to 90°) of the compressive fracture, while there is no significant influence on shear fracture. With the same σv applied, the horizontal stress difference has slightly impact on the type of newly-created fracture. The value of lateral stress coefficient that ranges from 0.35 to 1.20 decides the fracture type, which plays a crucial role in determining the stress magnitude and orientation around the fracture tip. The horizontal and vertical fracture are the main types when σv>σH>σh and σH>σv>σh respectively. The inclined fractures are possibly created in the coals with strong heterogeneity. Therefore, they can be used to predict the direction of initiation and propagation for the type of newly-created fracture during hydraulic fracturing for coalbed methane (CBM) development.

AB - Hydraulic fracturing is one of the most effective ways of formation stimulation for enhancing coalbed methane (CBM) recovery. The fracture initiation and propagation during hydraulic fracturing is primary constrained by local stress field, hydraulic pressure magnitude, coal properties, and natural fractures. In this work, the fracture initiation region and propagation direction during hydraulic fracturing under various in-situ stresses were investigated both experimentally and numerically. For experimental study, fracturing under true tri-axial stresses was designed to determine the fracture propagation under two sets of in-situ stresses. And for numerical study, a single-fracture model was constructed by using finite element method (FEM3D) ANSYS workbench, which indicates that high lateral stress coefficient is conducive to create new compressive fractures instead of shear fractures. σH = σv or σh = σv has a great influence on the initiation location that determined by θ (from −90° to 90°) of the compressive fracture, while there is no significant influence on shear fracture. With the same σv applied, the horizontal stress difference has slightly impact on the type of newly-created fracture. The value of lateral stress coefficient that ranges from 0.35 to 1.20 decides the fracture type, which plays a crucial role in determining the stress magnitude and orientation around the fracture tip. The horizontal and vertical fracture are the main types when σv>σH>σh and σH>σv>σh respectively. The inclined fractures are possibly created in the coals with strong heterogeneity. Therefore, they can be used to predict the direction of initiation and propagation for the type of newly-created fracture during hydraulic fracturing for coalbed methane (CBM) development.

KW - Finite element method

KW - Hydraulic fracturing

KW - Lateral stress coefficient

KW - Natural fracture initiation

UR - http://www.scopus.com/inward/record.url?scp=85017117999&partnerID=8YFLogxK

U2 - 10.1016/j.jngse.2017.03.022

DO - 10.1016/j.jngse.2017.03.022

M3 - Article

AN - SCOPUS:85017117999

VL - 43

SP - 69

EP - 80

JO - Journal of Natural Gas Science & Engineering

JF - Journal of Natural Gas Science & Engineering

SN - 1875-5100

ER -