Quantitative comparisons of depositional architectures of unconfined and confined turbidite sheet systems

Qun Liu* (Corresponding Author), Ben Kneller, Claus Fallgatter, Victoria Valdez Buso

*Corresponding author for this work

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Degree of confinement refers to the degree to which sediment gravity flows are influenced by the surrounding basin relief and interact with the basin margins, and is a key controlling factor in determining the depositional architectures of turbidite sheet systems. Two well exposed late Palaeozoic sandy turbidite sheet systems in the Paganzo Basin at Cerro Bola, north-west Argentina, termed Stages II and IV (unconfined and highly confined respectively), provide three-dimensional constraints on facies associations, stacking patterns, depositional geometries and evolution of these turbidite sheet systems. Cluster analysis has been applied to define facies associations in these two systems at an appropriate hierarchical level depending on the overall nature of the system. The overlap index (OI), OI = A0/A1, where A0 is the overlap area and A1 is the area of underlying depositional element, is adopted to quantitatively characterise the stacking patterns. The two turbidite sheet systems show contrasts in that: (1) Stage II is built up by four hierarchical elements, each stacked in a shingled or compensational way with the majority of overlap index values of 0.7 and 0.8, to form higher hierarchical elements, whereas in Stage IV, individual beds stack vertically with OI = 1, together forming the stage and (2) Four facies associations have been identified in Stage II by cluster analysis and they occur in a spatial sequence from axis to fringe; one facies association has been identified in Stage IV and it shows little variation spatially across the basin. In unconfined systems, depositional elements are self-organized, and autocyclic controls are dominant, whereas in highly confined systems, confinement has suppressed the autocyclic signal and systems are allocyclically controlled.

Original languageEnglish
Pages (from-to)72-89
Number of pages18
JournalSedimentary Geology
Volume376
Early online date15 Aug 2018
DOIs
Publication statusPublished - 15 Nov 2018

Fingerprint

turbidite
basin
stacking
cluster analysis
gravity flow
relief
Paleozoic
geometry
index
comparison
sediment

Keywords

  • Autocyclic
  • Degree of confinement
  • Depositional architecture
  • Facies Associations
  • Stacking patterns
  • Turbidite sheet systems

ASJC Scopus subject areas

  • Geology
  • Stratigraphy

Cite this

Quantitative comparisons of depositional architectures of unconfined and confined turbidite sheet systems. / Liu, Qun (Corresponding Author); Kneller, Ben; Fallgatter, Claus; Valdez Buso, Victoria.

In: Sedimentary Geology, Vol. 376, 15.11.2018, p. 72-89.

Research output: Contribution to journalArticle

@article{529811e1543146a4a241d368013d7bb7,
title = "Quantitative comparisons of depositional architectures of unconfined and confined turbidite sheet systems",
abstract = "Degree of confinement refers to the degree to which sediment gravity flows are influenced by the surrounding basin relief and interact with the basin margins, and is a key controlling factor in determining the depositional architectures of turbidite sheet systems. Two well exposed late Palaeozoic sandy turbidite sheet systems in the Paganzo Basin at Cerro Bola, north-west Argentina, termed Stages II and IV (unconfined and highly confined respectively), provide three-dimensional constraints on facies associations, stacking patterns, depositional geometries and evolution of these turbidite sheet systems. Cluster analysis has been applied to define facies associations in these two systems at an appropriate hierarchical level depending on the overall nature of the system. The overlap index (OI), OI = A0/A1, where A0 is the overlap area and A1 is the area of underlying depositional element, is adopted to quantitatively characterise the stacking patterns. The two turbidite sheet systems show contrasts in that: (1) Stage II is built up by four hierarchical elements, each stacked in a shingled or compensational way with the majority of overlap index values of 0.7 and 0.8, to form higher hierarchical elements, whereas in Stage IV, individual beds stack vertically with OI = 1, together forming the stage and (2) Four facies associations have been identified in Stage II by cluster analysis and they occur in a spatial sequence from axis to fringe; one facies association has been identified in Stage IV and it shows little variation spatially across the basin. In unconfined systems, depositional elements are self-organized, and autocyclic controls are dominant, whereas in highly confined systems, confinement has suppressed the autocyclic signal and systems are allocyclically controlled.",
keywords = "Autocyclic, Degree of confinement, Depositional architecture, Facies Associations, Stacking patterns, Turbidite sheet systems",
author = "Qun Liu and Ben Kneller and Claus Fallgatter and {Valdez Buso}, Victoria",
note = "The authors would like to acknowledge the support of the PRAX 2 Joint Industry Project at the University of Aberdeen, funded by PetroChina, Statoil, BP and Det Norske (now AkerBP), which has allowed us to undertake this study. We appreciate the feedback from two anonymous reviewers for insightful and thorough reviews that have greatly improved the structure and quality of the manuscript. We also would like to thank the editor, Jasper Knight, for detailed comments and suggestions for revisions.",
year = "2018",
month = "11",
day = "15",
doi = "10.1016/j.sedgeo.2018.08.005",
language = "English",
volume = "376",
pages = "72--89",
journal = "Sedimentary Geology",
issn = "0037-0738",
publisher = "Elsevier",

}

TY - JOUR

T1 - Quantitative comparisons of depositional architectures of unconfined and confined turbidite sheet systems

AU - Liu, Qun

AU - Kneller, Ben

AU - Fallgatter, Claus

AU - Valdez Buso, Victoria

N1 - The authors would like to acknowledge the support of the PRAX 2 Joint Industry Project at the University of Aberdeen, funded by PetroChina, Statoil, BP and Det Norske (now AkerBP), which has allowed us to undertake this study. We appreciate the feedback from two anonymous reviewers for insightful and thorough reviews that have greatly improved the structure and quality of the manuscript. We also would like to thank the editor, Jasper Knight, for detailed comments and suggestions for revisions.

PY - 2018/11/15

Y1 - 2018/11/15

N2 - Degree of confinement refers to the degree to which sediment gravity flows are influenced by the surrounding basin relief and interact with the basin margins, and is a key controlling factor in determining the depositional architectures of turbidite sheet systems. Two well exposed late Palaeozoic sandy turbidite sheet systems in the Paganzo Basin at Cerro Bola, north-west Argentina, termed Stages II and IV (unconfined and highly confined respectively), provide three-dimensional constraints on facies associations, stacking patterns, depositional geometries and evolution of these turbidite sheet systems. Cluster analysis has been applied to define facies associations in these two systems at an appropriate hierarchical level depending on the overall nature of the system. The overlap index (OI), OI = A0/A1, where A0 is the overlap area and A1 is the area of underlying depositional element, is adopted to quantitatively characterise the stacking patterns. The two turbidite sheet systems show contrasts in that: (1) Stage II is built up by four hierarchical elements, each stacked in a shingled or compensational way with the majority of overlap index values of 0.7 and 0.8, to form higher hierarchical elements, whereas in Stage IV, individual beds stack vertically with OI = 1, together forming the stage and (2) Four facies associations have been identified in Stage II by cluster analysis and they occur in a spatial sequence from axis to fringe; one facies association has been identified in Stage IV and it shows little variation spatially across the basin. In unconfined systems, depositional elements are self-organized, and autocyclic controls are dominant, whereas in highly confined systems, confinement has suppressed the autocyclic signal and systems are allocyclically controlled.

AB - Degree of confinement refers to the degree to which sediment gravity flows are influenced by the surrounding basin relief and interact with the basin margins, and is a key controlling factor in determining the depositional architectures of turbidite sheet systems. Two well exposed late Palaeozoic sandy turbidite sheet systems in the Paganzo Basin at Cerro Bola, north-west Argentina, termed Stages II and IV (unconfined and highly confined respectively), provide three-dimensional constraints on facies associations, stacking patterns, depositional geometries and evolution of these turbidite sheet systems. Cluster analysis has been applied to define facies associations in these two systems at an appropriate hierarchical level depending on the overall nature of the system. The overlap index (OI), OI = A0/A1, where A0 is the overlap area and A1 is the area of underlying depositional element, is adopted to quantitatively characterise the stacking patterns. The two turbidite sheet systems show contrasts in that: (1) Stage II is built up by four hierarchical elements, each stacked in a shingled or compensational way with the majority of overlap index values of 0.7 and 0.8, to form higher hierarchical elements, whereas in Stage IV, individual beds stack vertically with OI = 1, together forming the stage and (2) Four facies associations have been identified in Stage II by cluster analysis and they occur in a spatial sequence from axis to fringe; one facies association has been identified in Stage IV and it shows little variation spatially across the basin. In unconfined systems, depositional elements are self-organized, and autocyclic controls are dominant, whereas in highly confined systems, confinement has suppressed the autocyclic signal and systems are allocyclically controlled.

KW - Autocyclic

KW - Degree of confinement

KW - Depositional architecture

KW - Facies Associations

KW - Stacking patterns

KW - Turbidite sheet systems

UR - http://www.scopus.com/inward/record.url?scp=85051622060&partnerID=8YFLogxK

U2 - 10.1016/j.sedgeo.2018.08.005

DO - 10.1016/j.sedgeo.2018.08.005

M3 - Article

VL - 376

SP - 72

EP - 89

JO - Sedimentary Geology

JF - Sedimentary Geology

SN - 0037-0738

ER -