Selection of Positive Position Feedback Controllers for Damping and Precision Positioning Applications. (Best Paper Award Finalist)

Rahul Jagdish Moon, Andres San-Millan, Majid Aleyaasin, Vicente Feliu, Sumeet Sunil Aphale

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
3 Downloads (Pure)

Abstract

Positive Position Feedback (PPF) is a widely used control technique for damping the lightly damped resonant modes of various dynamic systems. Though PPF controller is easy to implement any rigorous mathematical optimization is not possible due to the controller structure. Therefore, almost all PPF designs reported in literature use a trial-and-error approach to push the closed-loop system poles adequately into the left-half plane to achieve adequate damping. In this paper, a full parametric study of the PPF controller based on the closed-loop DC gain vs. achievable damping relationship is carried out. It is shown that the PPF controller best suited to only damp the resonance is not the best if both damping and tracking control is required (as is the case in most precision positioning systems). This leads to a more systematic and goal-oriented selection of appropriate PPF controller for specific applications, hitherto unreported in literature. Experiments performed on a piezoelectric-stack actuated nanopositioning platform are presented to support this conclusion.
Original languageEnglish
Title of host publicationModelling, Design and Simulation of Systems
EditorsMohamed Sultan Mohamed Ali, Shafishuhaza Sahlan, Herman Wahid, Mohd Amri Md. Yunus, Unruly Adilla Mohd Subha, Ahmad Ridhwan Wahap
Place of PublicationMelaka, Malaysia
PublisherSpringer
Pages289-301
Number of pages13
Volume1
ISBN (Electronic)978-981-10-6463-0
ISBN (Print)978-981-10-6462-3
DOIs
Publication statusPublished - Aug 2017
Event17th ASIASIM conference - 17th ASIASIM conference, Melaka, Malaysia
Duration: 27 Aug 201729 Aug 2017

Publication series

NameCommunications in Computer and Information Science
PublisherSpringer
Volume751
ISSN (Electronic)1865-0929

Conference

Conference17th ASIASIM conference
CountryMalaysia
CityMelaka
Period27/08/1729/08/17

Fingerprint

Damping
Feedback
Controllers
Closed loop systems
Poles
Dynamical systems
Experiments

Cite this

Moon, R. J., San-Millan, A., Aleyaasin, M., Feliu, V., & Aphale, S. S. (2017). Selection of Positive Position Feedback Controllers for Damping and Precision Positioning Applications. (Best Paper Award Finalist). In M. S. Mohamed Ali, S. Sahlan, H. Wahid, M. A. Md. Yunus, U. A. Mohd Subha, & A. R. Wahap (Eds.), Modelling, Design and Simulation of Systems (Vol. 1, pp. 289-301). (Communications in Computer and Information Science; Vol. 751). Melaka, Malaysia: Springer . https://doi.org/10.1007/978-981-10-6463-0_25

Selection of Positive Position Feedback Controllers for Damping and Precision Positioning Applications. (Best Paper Award Finalist). / Moon, Rahul Jagdish; San-Millan, Andres ; Aleyaasin, Majid; Feliu, Vicente; Aphale, Sumeet Sunil.

Modelling, Design and Simulation of Systems. ed. / Mohamed Sultan Mohamed Ali; Shafishuhaza Sahlan; Herman Wahid; Mohd Amri Md. Yunus; Unruly Adilla Mohd Subha; Ahmad Ridhwan Wahap. Vol. 1 Melaka, Malaysia : Springer , 2017. p. 289-301 (Communications in Computer and Information Science; Vol. 751).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Moon, RJ, San-Millan, A, Aleyaasin, M, Feliu, V & Aphale, SS 2017, Selection of Positive Position Feedback Controllers for Damping and Precision Positioning Applications. (Best Paper Award Finalist). in MS Mohamed Ali, S Sahlan, H Wahid, MA Md. Yunus, UA Mohd Subha & AR Wahap (eds), Modelling, Design and Simulation of Systems. vol. 1, Communications in Computer and Information Science, vol. 751, Springer , Melaka, Malaysia, pp. 289-301, 17th ASIASIM conference, Melaka, Malaysia, 27/08/17. https://doi.org/10.1007/978-981-10-6463-0_25
Moon RJ, San-Millan A, Aleyaasin M, Feliu V, Aphale SS. Selection of Positive Position Feedback Controllers for Damping and Precision Positioning Applications. (Best Paper Award Finalist). In Mohamed Ali MS, Sahlan S, Wahid H, Md. Yunus MA, Mohd Subha UA, Wahap AR, editors, Modelling, Design and Simulation of Systems. Vol. 1. Melaka, Malaysia: Springer . 2017. p. 289-301. (Communications in Computer and Information Science). https://doi.org/10.1007/978-981-10-6463-0_25
Moon, Rahul Jagdish ; San-Millan, Andres ; Aleyaasin, Majid ; Feliu, Vicente ; Aphale, Sumeet Sunil. / Selection of Positive Position Feedback Controllers for Damping and Precision Positioning Applications. (Best Paper Award Finalist). Modelling, Design and Simulation of Systems. editor / Mohamed Sultan Mohamed Ali ; Shafishuhaza Sahlan ; Herman Wahid ; Mohd Amri Md. Yunus ; Unruly Adilla Mohd Subha ; Ahmad Ridhwan Wahap. Vol. 1 Melaka, Malaysia : Springer , 2017. pp. 289-301 (Communications in Computer and Information Science).
@inproceedings{09397f30d3f7409ab81d71b8c2541b7c,
title = "Selection of Positive Position Feedback Controllers for Damping and Precision Positioning Applications. (Best Paper Award Finalist)",
abstract = "Positive Position Feedback (PPF) is a widely used control technique for damping the lightly damped resonant modes of various dynamic systems. Though PPF controller is easy to implement any rigorous mathematical optimization is not possible due to the controller structure. Therefore, almost all PPF designs reported in literature use a trial-and-error approach to push the closed-loop system poles adequately into the left-half plane to achieve adequate damping. In this paper, a full parametric study of the PPF controller based on the closed-loop DC gain vs. achievable damping relationship is carried out. It is shown that the PPF controller best suited to only damp the resonance is not the best if both damping and tracking control is required (as is the case in most precision positioning systems). This leads to a more systematic and goal-oriented selection of appropriate PPF controller for specific applications, hitherto unreported in literature. Experiments performed on a piezoelectric-stack actuated nanopositioning platform are presented to support this conclusion.",
author = "Moon, {Rahul Jagdish} and Andres San-Millan and Majid Aleyaasin and Vicente Feliu and Aphale, {Sumeet Sunil}",
year = "2017",
month = "8",
doi = "10.1007/978-981-10-6463-0_25",
language = "English",
isbn = "978-981-10-6462-3",
volume = "1",
series = "Communications in Computer and Information Science",
publisher = "Springer",
pages = "289--301",
editor = "{Mohamed Ali}, {Mohamed Sultan} and Shafishuhaza Sahlan and Herman Wahid and {Md. Yunus}, {Mohd Amri } and {Mohd Subha}, {Unruly Adilla } and Wahap, {Ahmad Ridhwan}",
booktitle = "Modelling, Design and Simulation of Systems",

}

TY - GEN

T1 - Selection of Positive Position Feedback Controllers for Damping and Precision Positioning Applications. (Best Paper Award Finalist)

AU - Moon, Rahul Jagdish

AU - San-Millan, Andres

AU - Aleyaasin, Majid

AU - Feliu, Vicente

AU - Aphale, Sumeet Sunil

PY - 2017/8

Y1 - 2017/8

N2 - Positive Position Feedback (PPF) is a widely used control technique for damping the lightly damped resonant modes of various dynamic systems. Though PPF controller is easy to implement any rigorous mathematical optimization is not possible due to the controller structure. Therefore, almost all PPF designs reported in literature use a trial-and-error approach to push the closed-loop system poles adequately into the left-half plane to achieve adequate damping. In this paper, a full parametric study of the PPF controller based on the closed-loop DC gain vs. achievable damping relationship is carried out. It is shown that the PPF controller best suited to only damp the resonance is not the best if both damping and tracking control is required (as is the case in most precision positioning systems). This leads to a more systematic and goal-oriented selection of appropriate PPF controller for specific applications, hitherto unreported in literature. Experiments performed on a piezoelectric-stack actuated nanopositioning platform are presented to support this conclusion.

AB - Positive Position Feedback (PPF) is a widely used control technique for damping the lightly damped resonant modes of various dynamic systems. Though PPF controller is easy to implement any rigorous mathematical optimization is not possible due to the controller structure. Therefore, almost all PPF designs reported in literature use a trial-and-error approach to push the closed-loop system poles adequately into the left-half plane to achieve adequate damping. In this paper, a full parametric study of the PPF controller based on the closed-loop DC gain vs. achievable damping relationship is carried out. It is shown that the PPF controller best suited to only damp the resonance is not the best if both damping and tracking control is required (as is the case in most precision positioning systems). This leads to a more systematic and goal-oriented selection of appropriate PPF controller for specific applications, hitherto unreported in literature. Experiments performed on a piezoelectric-stack actuated nanopositioning platform are presented to support this conclusion.

U2 - 10.1007/978-981-10-6463-0_25

DO - 10.1007/978-981-10-6463-0_25

M3 - Conference contribution

SN - 978-981-10-6462-3

VL - 1

T3 - Communications in Computer and Information Science

SP - 289

EP - 301

BT - Modelling, Design and Simulation of Systems

A2 - Mohamed Ali, Mohamed Sultan

A2 - Sahlan, Shafishuhaza

A2 - Wahid, Herman

A2 - Md. Yunus, Mohd Amri

A2 - Mohd Subha, Unruly Adilla

A2 - Wahap, Ahmad Ridhwan

PB - Springer

CY - Melaka, Malaysia

ER -