Semi-analytical modelling of cracks with interacting faces in isotropic materials under harmonic load

Research output: Contribution to conferenceAbstract

Abstract

In structural materials the existing cracks often have a nonzero initial opening or a complex shape. Under the consequent dynamic loading the opposite crack faces move with respect to each other and interact. The contact interaction results in the appearance of the contact forces in the contact region and changes significantly the stress and strain distribution near the crack tips. The shape of the contact region will change in time and must be determined as a part of solution. The complexity of the problem is further compounded by the fact that the contact behaviour is very sensitive to the materials of two contacting surfaces and the type of the external loading. Such dependences make the contact problem for crack faces highly non-linear. As the consequence, in the majority of studies the interaction of crack faces was neglected and, therefore, the real stress-strain distribution was ignored due to the difficulties of finding the appropriate solution.

The present work is devoted to the investigation of the contact interaction of the faces of a crack located in the homogeneous, isotropic, linear elastic 3-D medium under harmonic loading. The Signorini contact constraints are imposed and the friction is governed by the Coulomb law.

The problem is solved by the method of the boundary integral equations with the use of the iterative procedure. The solution is refined during the iteration process until the distribution of physical values satisfy the contact constraints. The contact forces and displacement discontinuity on the crack surface are investigated for different wave parameters (frequency, direction, etc) and different values of the friction coefficient. The effect of the parameters on the stress intensity factors is studied. The results are compared with those obtained without allowance for the contact interaction. The significant difference between compared results confirms the crucial importance of taking the crack faces contact interaction into account.
Original languageEnglish
Pages43
Number of pages1
Publication statusPublished - Jul 2007
Event6th International Congress on Industrial and Applied Mathematics - Zurich, Switzerland
Duration: 16 Jul 200720 Jul 2007
Conference number: 6
http://iciam.org/event/iciam-2007-%E2%80%93-zurich

Conference

Conference6th International Congress on Industrial and Applied Mathematics
Abbreviated titleICIAM 07
CountrySwitzerland
CityZurich
Period16/07/0720/07/07
Internet address

Fingerprint

cracks
harmonics
electric contacts
strain distribution
interactions
friction
surface cracks
stress intensity factors
crack tips
allowances
stress distribution
iteration
integral equations
discontinuity

Cite this

Menshykov, O., & Guz, I. (2007). Semi-analytical modelling of cracks with interacting faces in isotropic materials under harmonic load. 43. Abstract from 6th International Congress on Industrial and Applied Mathematics, Zurich, Switzerland.

Semi-analytical modelling of cracks with interacting faces in isotropic materials under harmonic load. / Menshykov, Oleksandr; Guz, Igor.

2007. 43 Abstract from 6th International Congress on Industrial and Applied Mathematics, Zurich, Switzerland.

Research output: Contribution to conferenceAbstract

Menshykov, O & Guz, I 2007, 'Semi-analytical modelling of cracks with interacting faces in isotropic materials under harmonic load' 6th International Congress on Industrial and Applied Mathematics, Zurich, Switzerland, 16/07/07 - 20/07/07, pp. 43.
Menshykov O, Guz I. Semi-analytical modelling of cracks with interacting faces in isotropic materials under harmonic load. 2007. Abstract from 6th International Congress on Industrial and Applied Mathematics, Zurich, Switzerland.
Menshykov, Oleksandr ; Guz, Igor. / Semi-analytical modelling of cracks with interacting faces in isotropic materials under harmonic load. Abstract from 6th International Congress on Industrial and Applied Mathematics, Zurich, Switzerland.1 p.
@conference{92474f05307f4b5cb3743073aa184125,
title = "Semi-analytical modelling of cracks with interacting faces in isotropic materials under harmonic load",
abstract = "In structural materials the existing cracks often have a nonzero initial opening or a complex shape. Under the consequent dynamic loading the opposite crack faces move with respect to each other and interact. The contact interaction results in the appearance of the contact forces in the contact region and changes significantly the stress and strain distribution near the crack tips. The shape of the contact region will change in time and must be determined as a part of solution. The complexity of the problem is further compounded by the fact that the contact behaviour is very sensitive to the materials of two contacting surfaces and the type of the external loading. Such dependences make the contact problem for crack faces highly non-linear. As the consequence, in the majority of studies the interaction of crack faces was neglected and, therefore, the real stress-strain distribution was ignored due to the difficulties of finding the appropriate solution. The present work is devoted to the investigation of the contact interaction of the faces of a crack located in the homogeneous, isotropic, linear elastic 3-D medium under harmonic loading. The Signorini contact constraints are imposed and the friction is governed by the Coulomb law.The problem is solved by the method of the boundary integral equations with the use of the iterative procedure. The solution is refined during the iteration process until the distribution of physical values satisfy the contact constraints. The contact forces and displacement discontinuity on the crack surface are investigated for different wave parameters (frequency, direction, etc) and different values of the friction coefficient. The effect of the parameters on the stress intensity factors is studied. The results are compared with those obtained without allowance for the contact interaction. The significant difference between compared results confirms the crucial importance of taking the crack faces contact interaction into account.",
author = "Oleksandr Menshykov and Igor Guz",
year = "2007",
month = "7",
language = "English",
pages = "43",
note = "6th International Congress on Industrial and Applied Mathematics, ICIAM 07 ; Conference date: 16-07-2007 Through 20-07-2007",
url = "http://iciam.org/event/iciam-2007-{\%}E2{\%}80{\%}93-zurich",

}

TY - CONF

T1 - Semi-analytical modelling of cracks with interacting faces in isotropic materials under harmonic load

AU - Menshykov, Oleksandr

AU - Guz, Igor

PY - 2007/7

Y1 - 2007/7

N2 - In structural materials the existing cracks often have a nonzero initial opening or a complex shape. Under the consequent dynamic loading the opposite crack faces move with respect to each other and interact. The contact interaction results in the appearance of the contact forces in the contact region and changes significantly the stress and strain distribution near the crack tips. The shape of the contact region will change in time and must be determined as a part of solution. The complexity of the problem is further compounded by the fact that the contact behaviour is very sensitive to the materials of two contacting surfaces and the type of the external loading. Such dependences make the contact problem for crack faces highly non-linear. As the consequence, in the majority of studies the interaction of crack faces was neglected and, therefore, the real stress-strain distribution was ignored due to the difficulties of finding the appropriate solution. The present work is devoted to the investigation of the contact interaction of the faces of a crack located in the homogeneous, isotropic, linear elastic 3-D medium under harmonic loading. The Signorini contact constraints are imposed and the friction is governed by the Coulomb law.The problem is solved by the method of the boundary integral equations with the use of the iterative procedure. The solution is refined during the iteration process until the distribution of physical values satisfy the contact constraints. The contact forces and displacement discontinuity on the crack surface are investigated for different wave parameters (frequency, direction, etc) and different values of the friction coefficient. The effect of the parameters on the stress intensity factors is studied. The results are compared with those obtained without allowance for the contact interaction. The significant difference between compared results confirms the crucial importance of taking the crack faces contact interaction into account.

AB - In structural materials the existing cracks often have a nonzero initial opening or a complex shape. Under the consequent dynamic loading the opposite crack faces move with respect to each other and interact. The contact interaction results in the appearance of the contact forces in the contact region and changes significantly the stress and strain distribution near the crack tips. The shape of the contact region will change in time and must be determined as a part of solution. The complexity of the problem is further compounded by the fact that the contact behaviour is very sensitive to the materials of two contacting surfaces and the type of the external loading. Such dependences make the contact problem for crack faces highly non-linear. As the consequence, in the majority of studies the interaction of crack faces was neglected and, therefore, the real stress-strain distribution was ignored due to the difficulties of finding the appropriate solution. The present work is devoted to the investigation of the contact interaction of the faces of a crack located in the homogeneous, isotropic, linear elastic 3-D medium under harmonic loading. The Signorini contact constraints are imposed and the friction is governed by the Coulomb law.The problem is solved by the method of the boundary integral equations with the use of the iterative procedure. The solution is refined during the iteration process until the distribution of physical values satisfy the contact constraints. The contact forces and displacement discontinuity on the crack surface are investigated for different wave parameters (frequency, direction, etc) and different values of the friction coefficient. The effect of the parameters on the stress intensity factors is studied. The results are compared with those obtained without allowance for the contact interaction. The significant difference between compared results confirms the crucial importance of taking the crack faces contact interaction into account.

M3 - Abstract

SP - 43

ER -