Shape optimization of cold-formed steel beam-columns with practical and manufacturing constraints

Hossein Parastesh (Corresponding Author), Iman Hajirasouliha, Hamed Taji, Alireza Bagheri Sabbagh

Research output: Contribution to journalArticle

Abstract

This study aims to present a practical method for optimization of symmetric cold-formed steel (CFS) beam-column members using Genetic Algorithm (GA). To eliminate impractical cross-section shapes from the optimization results, a range of manufacturing and construction constraints are incorporated into the optimization process. Axial forces are applied with different eccentricities (0 to 30 mm) to cover the full spectrum of beam-column actions from pure axial compression to pure bending. The effect of element length on the optimization results is investigated by using short, intermediate and long beam-column members. A total of 132 beam-columns with different cross section shape complexity (4 to 12 rollers/nodes and 1 to 3 lips) are optimized. The compression and bending moment strengths are obtained based on direct strength method (DSM) using CUFSM software by accounting for local, distortional and global buckling modes. The results show that using more complex shapes does not necessarily lead to better design solutions. Increasing the eccentricity generally leads to more spread optimum sections particularly when distortional buckling is the predominant mode in short and intermediate-length beam-columns. In cases where local and global buckling modes govern the design, however, less spread sections with higher turn angles generally provide higher strength capacities. With the variation of eccentricity, the ultimate strength of optimum beam-column sections normalized by the strength of a reference lipped-channel are in the range of 110–163%, 128–194% and 160–222% for short, medium and long members, respectively. The results of this study, should prove useful in more efficient design of CFS beam-column elements in practice.

Original languageEnglish
Pages (from-to)249-259
Number of pages11
JournalJournal of Constructional Steel Research
Volume155
Early online date11 Jan 2019
DOIs
Publication statusPublished - 1 Apr 2019

Fingerprint

Steel
Shape optimization
Buckling
Axial compression
Bending moments
Genetic algorithms

Keywords

  • cold-formed steel
  • shape optimization
  • genetic algorithm
  • beam columns
  • buckling modes
  • Beam-columns
  • DESIGN
  • Cold-formed steel
  • Genetic algorithm
  • Shape optimization
  • Buckling modes
  • SECTIONS

Cite this

Shape optimization of cold-formed steel beam-columns with practical and manufacturing constraints. / Parastesh, Hossein (Corresponding Author); Hajirasouliha, Iman; Taji, Hamed; Bagheri Sabbagh, Alireza.

In: Journal of Constructional Steel Research, Vol. 155, 01.04.2019, p. 249-259.

Research output: Contribution to journalArticle

@article{8998afd35d94461197db1ff6a886152f,
title = "Shape optimization of cold-formed steel beam-columns with practical and manufacturing constraints",
abstract = "This study aims to present a practical method for optimization of symmetric cold-formed steel (CFS) beam-column members using Genetic Algorithm (GA). To eliminate impractical cross-section shapes from the optimization results, a range of manufacturing and construction constraints are incorporated into the optimization process. Axial forces are applied with different eccentricities (0 to 30 mm) to cover the full spectrum of beam-column actions from pure axial compression to pure bending. The effect of element length on the optimization results is investigated by using short, intermediate and long beam-column members. A total of 132 beam-columns with different cross section shape complexity (4 to 12 rollers/nodes and 1 to 3 lips) are optimized. The compression and bending moment strengths are obtained based on direct strength method (DSM) using CUFSM software by accounting for local, distortional and global buckling modes. The results show that using more complex shapes does not necessarily lead to better design solutions. Increasing the eccentricity generally leads to more spread optimum sections particularly when distortional buckling is the predominant mode in short and intermediate-length beam-columns. In cases where local and global buckling modes govern the design, however, less spread sections with higher turn angles generally provide higher strength capacities. With the variation of eccentricity, the ultimate strength of optimum beam-column sections normalized by the strength of a reference lipped-channel are in the range of 110–163{\%}, 128–194{\%} and 160–222{\%} for short, medium and long members, respectively. The results of this study, should prove useful in more efficient design of CFS beam-column elements in practice.",
keywords = "cold-formed steel, shape optimization, genetic algorithm, beam columns, buckling modes, Beam-columns, DESIGN, Cold-formed steel, Genetic algorithm, Shape optimization, Buckling modes, SECTIONS",
author = "Hossein Parastesh and Iman Hajirasouliha and Hamed Taji and {Bagheri Sabbagh}, Alireza",
year = "2019",
month = "4",
day = "1",
doi = "10.1016/j.jcsr.2018.12.031",
language = "English",
volume = "155",
pages = "249--259",
journal = "Journal of Constructional Steel Research",
issn = "0143-974X",
publisher = "ELSEVIER APPL SCI PUBL LTD",

}

TY - JOUR

T1 - Shape optimization of cold-formed steel beam-columns with practical and manufacturing constraints

AU - Parastesh, Hossein

AU - Hajirasouliha, Iman

AU - Taji, Hamed

AU - Bagheri Sabbagh, Alireza

PY - 2019/4/1

Y1 - 2019/4/1

N2 - This study aims to present a practical method for optimization of symmetric cold-formed steel (CFS) beam-column members using Genetic Algorithm (GA). To eliminate impractical cross-section shapes from the optimization results, a range of manufacturing and construction constraints are incorporated into the optimization process. Axial forces are applied with different eccentricities (0 to 30 mm) to cover the full spectrum of beam-column actions from pure axial compression to pure bending. The effect of element length on the optimization results is investigated by using short, intermediate and long beam-column members. A total of 132 beam-columns with different cross section shape complexity (4 to 12 rollers/nodes and 1 to 3 lips) are optimized. The compression and bending moment strengths are obtained based on direct strength method (DSM) using CUFSM software by accounting for local, distortional and global buckling modes. The results show that using more complex shapes does not necessarily lead to better design solutions. Increasing the eccentricity generally leads to more spread optimum sections particularly when distortional buckling is the predominant mode in short and intermediate-length beam-columns. In cases where local and global buckling modes govern the design, however, less spread sections with higher turn angles generally provide higher strength capacities. With the variation of eccentricity, the ultimate strength of optimum beam-column sections normalized by the strength of a reference lipped-channel are in the range of 110–163%, 128–194% and 160–222% for short, medium and long members, respectively. The results of this study, should prove useful in more efficient design of CFS beam-column elements in practice.

AB - This study aims to present a practical method for optimization of symmetric cold-formed steel (CFS) beam-column members using Genetic Algorithm (GA). To eliminate impractical cross-section shapes from the optimization results, a range of manufacturing and construction constraints are incorporated into the optimization process. Axial forces are applied with different eccentricities (0 to 30 mm) to cover the full spectrum of beam-column actions from pure axial compression to pure bending. The effect of element length on the optimization results is investigated by using short, intermediate and long beam-column members. A total of 132 beam-columns with different cross section shape complexity (4 to 12 rollers/nodes and 1 to 3 lips) are optimized. The compression and bending moment strengths are obtained based on direct strength method (DSM) using CUFSM software by accounting for local, distortional and global buckling modes. The results show that using more complex shapes does not necessarily lead to better design solutions. Increasing the eccentricity generally leads to more spread optimum sections particularly when distortional buckling is the predominant mode in short and intermediate-length beam-columns. In cases where local and global buckling modes govern the design, however, less spread sections with higher turn angles generally provide higher strength capacities. With the variation of eccentricity, the ultimate strength of optimum beam-column sections normalized by the strength of a reference lipped-channel are in the range of 110–163%, 128–194% and 160–222% for short, medium and long members, respectively. The results of this study, should prove useful in more efficient design of CFS beam-column elements in practice.

KW - cold-formed steel

KW - shape optimization

KW - genetic algorithm

KW - beam columns

KW - buckling modes

KW - Beam-columns

KW - DESIGN

KW - Cold-formed steel

KW - Genetic algorithm

KW - Shape optimization

KW - Buckling modes

KW - SECTIONS

U2 - 10.1016/j.jcsr.2018.12.031

DO - 10.1016/j.jcsr.2018.12.031

M3 - Article

VL - 155

SP - 249

EP - 259

JO - Journal of Constructional Steel Research

JF - Journal of Constructional Steel Research

SN - 0143-974X

ER -