If you made any changes in Pure these will be visible here soon.

Research Output 1999 2019

  • 414 Citations
  • 35 Article
  • 4 Conference contribution
  • 2 Paper
  • 1 Chapter
Filter
Article
2019
Steel pipe
Tubing
Stress corrosion cracking
Pitting
Load limits

Evaluation of the interactions between oilfield chemicals and reservoir rocks

Wuyep, E. O., Oluyemi, G. F., Yates, K. & Akisanya, A. R., 23 Jul 2019, In : Natural Resources Research. 20 p.

Research output: Contribution to journalArticle

Open Access
reservoir rock
sand
failure mechanism
compressive strength
inhibitor

Solution Volume Effect on the Corrosion of Super Duplex Stainless Steel Pipes Under Combined Loading

Lasebikan, B. A., Akisanya, A. R. & Deans, W. F., 5 Aug 2019, (Accepted/In press) In : Materials Performance. 13 p.

Research output: Contribution to journalArticle

Steel pipe
Tubing
Stainless steel
Corrosion
Well completion
2018
2 Citations (Scopus)
3 Downloads (Pure)

Failure analysis of a failed anchor chain link

Sridhar, I., Akisanya, A. R., Loh, K. & Yeo, S., Jul 2018, In : Engineering Failure Analysis. 89, p. 258-270 12 p.

Research output: Contribution to journalArticle

Open Access
File
Anchors
Failure analysis
Cracks
Flash welding
Metals
1 Citation (Scopus)
4 Downloads (Pure)

Geomechanical effects of oilfield chemicals on sand failure in reservoir rocks

Wuyep, E. O., Oluyemi, G. F., Yates, K. & Akisanya, A. R., Jun 2018, In : Journal of Petroleum Science and Engineering. 165, p. 347-357 11 p.

Research output: Contribution to journalArticle

Open Access
File
reservoir rock
Sand
Rocks
sand
compressive strength
2017
1 Citation (Scopus)
5 Downloads (Pure)

Fracture initiation in bi-material joints subject to combined tension and shear loading

Akisanya, AR., 24 Jun 2017, In : Journal of Adhesion Science and Technology. 31, 19-20, p. 2092-2104 13 p.

Research output: Contribution to journalArticle

Open Access
File
shear
butt joints
brasses
Shear stress
Brass
2016
3 Citations (Scopus)
45 Downloads (Pure)

Indentation failure of circular composite sandwich plates

Rajaneesh, A., Sridhar, I. & Akisanya, A. R., 5 Jan 2016, In : Materials & Design. 89, p. 439-447 9 p.

Research output: Contribution to journalArticle

Open Access
File
Indentation
Composite materials
Sandwich structures
Subroutines
Foams
2015
2 Citations (Scopus)
20 Downloads (Pure)

Autoclave design for high pressure-high temperature corrosion studies

Lasebikan, B. A., Akisanya, A. R. & Deans, W. F., 2015, In : Journal of Engineering Design And Technology. 13, 4, p. 539-555 18 p.

Research output: Contribution to journalArticle

Open Access
File
Autoclaves
Corrosion
Temperature
Mechanical testing
Gases
12 Citations (Scopus)
51 Downloads (Pure)

Experimental studies of the resultant contact forces in drillbit-rock interaction

Ajibose, O. K., Wiercigroch, M. & Akisanya, A. R., Feb 2015, In : International Journal of Mechanical Sciences. 91, p. 3-11 9 p.

Research output: Contribution to journalArticle

Open Access
File
Drilling
Rocks
rocks
Die casting inserts
Basalt
2014
4 Downloads (Pure)

Analysis of bolted flanged panel joint for GRP sectional tanks

Menon Radhakrishnan, S. M., Dyer, B., Kashtalyan, M., Akisanya, A. R., Guz, I. & Wilkinson, C., Feb 2014, In : Applied Composite Materials. 21, 1, p. 247-261 14 p.

Research output: Contribution to journalArticle

Open Access
File
Reinforced plastics
Bolts
Glass
Bolted joints
Computational methods
11 Citations (Scopus)
5 Downloads (Pure)
Open Access
File
Stainless Steel
Steel pipe
Stainless steel
Temperature
6 Citations (Scopus)
4 Downloads (Pure)

Debonding along the fixed anchor length of a ground anchorage

Akisanya, A. R. & Ivanovic, A., 1 Sep 2014, In : Engineering Structures. 74, p. 23-31 9 p.

Research output: Contribution to journalArticle

Open Access
File
Debonding
Anchors
Load limits
Tendons
Fracture toughness
2013
8 Citations (Scopus)
7 Downloads (Pure)

The Mechanical Behavior of a 25Cr Super Duplex Stainless Steel at Elevated Temperature

Lasebikan, B. A., Akisanya, A. R. & Deans, W. F., Feb 2013, In : Journal of Materials Engineering and Performance . 22, 2, p. 598-606 9 p.

Research output: Contribution to journalArticle

Open Access
File
Stainless Steel
Stainless steel
Tensile properties
Oils
Pipelines
2012
13 Citations (Scopus)

Drifting Impact Oscillator With a New Model of the Progression Phase

Ajibose, O. K., Wiercigroch, M., Pavlovskaia, E. E., Akisanya, A. R. & Károlyi, G., Dec 2012, In : Journal of Applied Mechanics . 79, 6, 9 p., 061007.

Research output: Contribution to journalArticle

Unloading
progressions
Dynamic response
impactors
unloading
26 Citations (Scopus)
4 Downloads (Pure)
Open Access
File
Tungsten
Stainless Steel
stainless steels
tungsten
Stainless steel
2011
8 Citations (Scopus)
4 Downloads (Pure)

Cold hydraulic expansion of oil well tubulars

Akisanya, A. R., Khan, F., Deans, W. F. & Wood, P., Dec 2011, In : International Journal of Pressure Vessels and Piping. 88, 11-12, p. 465-472 8 p.

Research output: Contribution to journalArticle

Open Access
File
Oil wells
Hydraulics
Oils
Gases
Plasticity
2 Citations (Scopus)
5 Downloads (Pure)

The effect of hydrogen sulphide on ammonium bisulphite when used as an oxygen scavenger in aqueous solutions

Lasebikan, B. A., Akisanya, A. R., Deans, W. F. & MacPhee, D. E., Dec 2011, In : Corrosion Science. 53, 12, p. 4014-4025 14 p.

Research output: Contribution to journalArticle

Open Access
File
Hydrogen Sulfide
Hydrogen sulfide
Dissolved oxygen
Ammonium Compounds
Oxygen
2010
20 Citations (Scopus)
Contact Force
Stiffness
Global Dynamics
Model
Damping

The effect of ammonium bisulfite on sulfide in brine/H2S solution

Lasebikan, B. A., Akisanya, A. R., Deans, W. F., MacPhee, D. E. & Boyle, L., 2010, In : NACE - International Corrosion Conference Series. 22 p.

Research output: Contribution to journalArticle

Sulfides
Deionized water
Well completion
Hydrogen sulfide
Hydrogen Sulfide
2006
13 Citations (Scopus)

Plastic collapse of thin-walled frusta and egg-box material under shear and normal loading

Akisanya, A. R. & Fleck, N. A., 2006, In : International Journal of Mechanical Sciences. 48, p. 799-808 9 p.

Research output: Contribution to journalArticle

2003
75 Citations (Scopus)

Initiation of fracture at the interface corner of bi-material joints

Akisanya, A. R. & Meng, C. S., Jan 2003, In : Journal of the Mechanics and Physics of Solids. 51, 1, p. 27-46 19 p.

Research output: Contribution to journalArticle

2002
7 Citations (Scopus)

Stress Behaviour at the Interface Junction of an Elastic Inclusion

Qian, Z. Q., Akisanya, A. R. & Thomson, D. S., Nov 2002, In : Journal of Applied Mechanics . 69, 6, p. 844-852 8 p.

Research output: Contribution to journalArticle

2001
8 Citations (Scopus)

Cold compaction of an array of cylindrical powder particles

Sridhar, I., Fleck, N. A. & Akisanya, A. R., 2001, In : International Journal of Mechanical Sciences. 43, p. 715-724 9 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)

Micro-mechanical modelling of powder compaction

Henderson, R., Chandler, H. W., Akisanya, A. R., Chandler, C. M. & Nixon, S. A., Apr 2001, In : Journal of the Mechanics and Physics of Solids. 49, 4, p. 739-759 20 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

The deformation and densification of an array of metal-coated fibres

Akisanya, A. R., Zhang, Y., Chandler, H. W. & Henderson, R., Jul 2001, In : Acta Materialia. 49, 2, p. 221-235 14 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

The deformation of a dual-elastomer seal

Akisanya, A. R., Hitchcock, G. R. & Thompson, D. S., 2001, In : Proceedings of the Institution of Mechanical Engineers. Part L, Journal of Materials - Design and Applications. 215, p. 29-40 12 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

The stress distribution at the interface corner of a tri-material structure

Qian, Z. Q. & Akisanya, A. R., 2001, In : Journal of Engineering Mechanics. 127, p. 747-753 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

The yield behaviour of an array of metal-coated fibres

Akisanya, A. R., Zhang, Y., Chandler, H. W. & Henderson, R. J., 2001, In : European Journal of Mechanics A/Solids. 20, p. 77-90 14 p.

Research output: Contribution to journalArticle

2000
12 Citations (Scopus)

Bag design in isostatic pressing

Henderson, R., Chandler, H. W., Akisanya, A. R. & Moriarty, B., Aug 2000, In : Materials & Design. 21, 4, p. 259-262 4 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)

Edge effects in the failure of elastic/viscoelastic joints subjected to surface tractions

Qian, Z. Q., Akisanya, A. R. & Imbabi, M. S., 11 Oct 2000, In : International Journal of Solids and Structures. 37, 41, p. 5973-5994 22 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Effects of geometry on the deformation of asphaltic plug joints subjected to surface tractions

Qian, Z. Q., Akisanya, A. R. & Imbabi, M. S., 1 Sep 2000, In : The Journal of Strain Analysis for Engineering Design. 35, 5, p. 403-413 11 p.

Research output: Contribution to journalArticle

31 Citations (Scopus)

Finite element modelling of cold isostatic pressing

Henderson, R. J., Chandler, H. W., Akisanya, A. R., Barber, H. & Moriarty, B., 2000, In : Journal of the European Ceramic Society. 20, p. 1121-1128 8 p.

Research output: Contribution to journalArticle

1999
47 Citations (Scopus)

An investigation of the stress singularity near the free edge of scarf joints

Qian, Z. Q. & Akisanya, A. R., 1999, In : European Journal of Mechanics A/Solids. 18, p. 443-463 21 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)
38 Citations (Scopus)

Wedge corner stress behaviour of bonded dissimilar materials

Qian, Z. Q. & Akisanya, A. R., 1999, In : Theoretical and Applied Fracture Mechanics. 32, p. 209-222 14 p.

Research output: Contribution to journalArticle