Mehmet Emin Kartal

Dr

    • AB24 3UE

    • 431 Citations
    20042019
    If you made any changes in Pure these will be visible here soon.

    Research Output 2004 2019

    Filter
    Article
    2019
    Titanium alloys
    Plasticity
    Crystals
    Phase boundaries
    Single crystals
    Crystal Plasticity
    Titanium Alloy
    titanium alloys
    Phase boundaries
    Voids
    2018
    2 Citations (Scopus)
    3 Downloads (Pure)

    Contribution of finite element analyses to crack-like flaw assessments in a gas pipeline

    Thibault, J., Kartal, M. E., Du Suau, G. & Hertz-Clémens, S., Mar 2018, In : International Journal of Pressure Vessels and Piping. 161, p. 41-49 9 p.

    Research output: Contribution to journalArticle

    Open Access
    File
    Gas pipelines
    Cracks
    Stress intensity factors
    Defects
    Pipe
    2 Citations (Scopus)

    The inclusion of short-transverse displacements in the eigenstrain reconstruction of residual stress and distortion in in740h weldments

    Uzun, F., Everaerts, J., Brandt, L., Kartal, M. E., Salvati, E. & Korsunsky, A. M., 31 Dec 2018, In : Journal of Manufacturing Processes. 36, p. 601-612 12 p.

    Research output: Contribution to journalArticle

    Residual stresses
    Welds
    Electric discharge machining
    Inverse problems
    Inclusion
    2017
    3 Citations (Scopus)
    5 Downloads (Pure)

    Three-dimensional in situ observations of compressive damage mechanisms in syntactic foam using X-ray microcomputed tomography

    Kartal, M. E., Dugdale, L. H., Harrigan, J. J., Siddiq, M. A., Pokrajac, D. & Mulvihill, D. M., Sep 2017, In : Journal of Materials Science. 52, 17, p. 10186-10197 11 p.

    Research output: Contribution to journalArticle

    Open Access
    File
    Syntactics
    Microspheres
    Tomography
    Foams
    Shear bands
    2016
    9 Citations (Scopus)

    The effect of specimen size and surface conditions on the local mechanical properties of 14MoV6 ferritic–pearlitic steel

    Molak, R. M., Kartal, M. E., Pakiela, Z. & Kurzydlowski, K. J., 10 Jan 2016, In : Materials Science and Engineering A. 651, p. 810-821 12 p.

    Research output: Contribution to journalArticle

    Steel
    steels
    mechanical properties
    Mechanical properties
    Tensile testing
    24 Citations (Scopus)

    The Influence of Welding Procedure and Plate Geometry on Residual Stresses in Thick Components

    Kartal, M. E., Kang, Y-H., Korsunsky, A. M., Cocks, A. C. F. & Bouchard, J. P., Feb 2016, In : International Journal of Solids and Structures. 80, p. 420-429 10 p.

    Research output: Contribution to journalArticle

    Residual Stress
    Welding
    welding
    residual stress
    Residual stresses
    2015
    14 Citations (Scopus)
    Eigenstrain
    Crystal Plasticity
    Superalloy
    heat resistant alloys
    Single Crystal
    2014
    16 Citations (Scopus)

    Effects of crystallographic orientation and grain morphology on crack tip stress state and plasticity

    Kartal, M. E., Cuddihy, M. A. & Dunne, F. P. E., Apr 2014, In : International journal of fatigue. 61, 46-58, p. 46-58 13 p.

    Research output: Contribution to journalArticle

    Crack Tip
    Crack tips
    Plasticity
    Crystal orientation
    Crystal
    2013
    18 Citations (Scopus)

    A comparison of contact stiffness measurements obtained by the digital image correlation and ultrasound techniques

    Mulvihill, D. M., Brunskill, H., Kartal, M. E., Dwyer-Joyce, R. S. & Nowell, D., 1 Sep 2013, In : Experimental Mechanics. 53, 7, p. 1245-1263 19 p.

    Research output: Contribution to journalArticle

    Ultrasonics
    Stiffness
    Unloading
    Loads (forces)
    9 Citations (Scopus)
    Residual Stress
    residual stress
    Residual stresses
    Analytical Solution
    stress measurement
    4 Downloads (Pure)

    Characterisation of crack tip fields under non-uniform fatigue loading

    Nowell, D., Kartal, M. E. & De Matos, P. F. P., 1 Jan 2013, In : Frattura ed Integrità Strutturale. 25, 7, p. 1-6 6 p.

    Research output: Contribution to journalArticle

    Open Access
    File
    Stress intensity factors
    Crack tips
    Fatigue of materials
    Cracks
    Crack closure
    24 Citations (Scopus)
    Crack tips
    Crack closure
    Plastics
    Elastic deformation
    Stress intensity factors
    2012
    21 Citations (Scopus)

    Determination of the complete microscale residual stress tensor at a subsurface carbide particle in a single-crystal superalloy from free-surface EBSD

    Kartal, M. E., Dunne, F. P. E. & Wilkinson, A. J., Aug 2012, In : Acta Materialia. 60, 13-14, p. 5300-5310 11 p.

    Research output: Contribution to journalArticle

    Superalloys
    Tensors
    Carbides
    Residual stresses
    Diffraction
    2011
    58 Citations (Scopus)

    An elastic–plastic asperity interaction model for sliding friction

    Mulvihill, D. M., Kartal, M. E., Nowell, D. & Hills, D. A., Nov 2011, In : Tribology International. 44, 12, p. 1679-1694 16 p.

    Research output: Contribution to journalArticle

    sliding friction
    coefficient of friction
    Friction
    shear strength
    titanium alloys
    28 Citations (Scopus)

    Determination of the frictional properties of titanium and nickel alloys using the digital image correlation method

    Kartal, M. E., Mulvihill, D. M., Nowell, D. & Hills, D. A., 1 Mar 2011, In : Experimental Mechanics. 51, 3, p. 359-371 13 p.

    Research output: Contribution to journalArticle

    Correlation methods
    Nickel alloys
    Titanium alloys
    Stiffness
    Tensile testing
    29 Citations (Scopus)

    Investigation of non-Coulomb friction behaviour in reciprocating sliding

    Mulvihill, D. M., Kartal, M. E., Nowell, D. & Hills, D. A., 22 Jun 2011, In : Wear. 271, 5, p. 802-816 15 p.

    Research output: Contribution to journalArticle

    sliding
    friction
    fretting
    Friction
    interactions
    2 Citations (Scopus)

    Investigation of the friction variation with sliding which is commonly observed in individual fretting test cycles

    Mulvihill, D. M., Kartal, M. E., Nowell, D. & Hills, D. A., 8 Sep 2011, In : Applied Mechanics and Materials. 70, p. 213-218 6 p.

    Research output: Contribution to journalArticle

    Wear of materials
    Friction
    Surface topography
    Microscopes
    Testing
    1 Citation (Scopus)

    Measurement of tangential contact stiffness in frictional contacts: the effect of normal pressure

    Kartal, M. E., Mulvihill, D. M., Nowell, D. & Hills, D. A., 8 Sep 2011, In : Applied Mechanics and Materials. 70, p. 321-326 6 p.

    Research output: Contribution to journalArticle

    Stiffness
    Correlation methods
    Tensile testing
    Structural integrity
    Damping
    39 Citations (Scopus)

    Measurements of pressure and area dependent tangential contact stiffness between rough surfaces using digital image correlation

    Kartal, M. E., Mulvihill, D. M., Nowell, D. & Hills, D. A., Sep 2011, In : Tribology International. 44, 10, p. 1188-1198 11 p.

    Research output: Contribution to journalArticle

    stiffness
    Stiffness
    fretting
    Correlation methods
    titanium alloys
    11 Citations (Scopus)

    Partial slip problem for two semi-infinite strips in contact

    Kartal, M. E., Barber, J. R., Hills, D. A. & Nowell, D., Feb 2011, In : International Journal of Engineering Science. 49, 2, p. 203-211 9 p.

    Research output: Contribution to journalArticle

    Tensors
    2010
    14 Citations (Scopus)

    Torsional contact between elastically similar flat-ended cylinders

    Kartal, M. E., Hills, D. A., Nowell, D. & Barber, J. R., 15 May 2010, In : International Journal of Solids and Structures. 47, 10, p. 1375-1380 6 p.

    Research output: Contribution to journalArticle

    Partial Slip
    Frictional Contact
    Coaxial
    Torque
    torque
    2008
    50 Citations (Scopus)

    Determination of the profile of the complete residual stress tensor in a VPPA weld using the multi-axial contour method

    Kartal, M. E., Liljedahl, C. M. D., Gungor, S., Edwards, L. & Fitzpatrick, M. E., 30 Sep 2008, In : Acta Materialia. 56, 16, p. 4417-4428 12 p.

    Research output: Contribution to journalArticle

    Tensors
    Residual stresses
    Welds
    Stress measurement
    Stress relaxation
    2007
    10 Citations (Scopus)

    Determination of weld metal mechanical properties utilising novel tensile testing methods

    Kartal, M. E., Molak, R. M., Turski, M., Gungor, S., Fitzpatrick, M. E. & Edwards, L., Aug 2007, In : Applied Mechanics and Materials. 7-8, p. 127-132 6 p.

    Research output: Contribution to journalArticle

    Tensile testing
    Welds
    Mechanical properties
    Metals
    Stress-strain curves
    14 Citations (Scopus)

    Use of micro tensile test samples in determining the remnant life of pressure vessel steels

    Molak, R. M., Kartal, M. E., Pakiela, Z., Manaj, W., Turski, M., Hiller, S., Gungor, S., Edwards, L. & Kurzydlowski, K. J., Aug 2007, In : Applied Mechanics and Materials. 7-8, p. 187-194 8 p.

    Research output: Contribution to journalArticle

    Steel structures
    Mechanical properties
    Correlation methods
    Strain measurement
    Elongation
    2006
    26 Citations (Scopus)

    Residual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method

    Kartal, M. E., Turski, M., Johson, G., Fitzpatrick, M. E., Gungor, S., Withers, P. J. & Edwards, L., 2006, In : Materials Science Forum. 524-525, p. 671-676 6 p.

    Research output: Contribution to journalArticle

    7 Citations (Scopus)

    Stress distributions in cooling fins of variable thickness with and without rotation

    Eraslan, A. N. & Kartal, M. E., 1 Aug 2005, In : Journal of Thermal Stresses. 28, 8, p. 861-883 23 p.

    Research output: Contribution to journalArticle