A Multifunctional Current Source Inverter Control for Wind Turbine Grid Interfacing

M. S. Hamad*, K. H. Ahmed

*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

This paper presents a multifunctional PWM current source based wind energy conversion system for wind turbine interfacing. The proposed predictive controller exchanges the power with the grid and the load and achieves active power filtering function by improving the grid power quality due to the distortion caused by non-linear loads. The proposed system is modeled using MATLAB/Simulink and the performance is tested for different operation conditions.

Original languageEnglish
Title of host publication2015 INTERNATIONAL CONFERENCE ON RENEWABLE ENERGY RESEARCH AND APPLICATIONS (ICRERA)
PublisherIEEE Press
Pages1328-1331
Number of pages4
ISBN (Electronic)978-1-4799-9982-8
Publication statusPublished - 2015
Event4th International Conference on Renewable Energy Research and Applications (ICRERA) - Palermo, Italy
Duration: 22 Nov 201525 Nov 2015

Publication series

NameInternational Conference on Renewable Energy Research and Applications
PublisherIEEE
ISSN (Print)2377-6897

Conference

Conference4th International Conference on Renewable Energy Research and Applications (ICRERA)
CountryItaly
CityPalermo
Period22/11/1525/11/15

Keywords

  • CSI
  • active power filter
  • nonlinear load
  • predictive control
  • systems
  • implementation
  • 3-Phase

ASJC Scopus subject areas

  • Energy(all)

Cite this

Hamad, M. S., & Ahmed, K. H. (2015). A Multifunctional Current Source Inverter Control for Wind Turbine Grid Interfacing. In 2015 INTERNATIONAL CONFERENCE ON RENEWABLE ENERGY RESEARCH AND APPLICATIONS (ICRERA) (pp. 1328-1331). (International Conference on Renewable Energy Research and Applications). IEEE Press. http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=7418624