Volumetric properties of (piperidine + water) binary system

measurements and modeling

Waheed Afzal, Alain Valtz, Christophe Coquelet, Dominique Richon

Research output: Contribution to journalArticle

13 Citations (Scopus)

Abstract

Densities of pure piperidine (CAS No.: 110-89-4) and of its mixtures with water have been measured over the whole range of compositions at temperatures from 283.15 K to 347.15 K using Anton Paar™ digital vibrating tube densimeter. The density of this system has been found increasing with mass fraction of water. Excess molar volumes have been calculated using the measured experimental densities and correlated using the Redlich–Kister equation. Redlich–Kister equation parameters have been adjusted on experimental data. In addition, partial molar volumes and partial excess molar volumes at infinite dilution have been calculated for each component.
Original languageEnglish
Pages (from-to)47-53
Number of pages7
JournalThe Journal of Chemical Thermodynamics
Volume40
Issue number1
DOIs
Publication statusPublished - Jan 2008

Fingerprint

piperidine
Density (specific gravity)
Water
water
densimeters
Dilution
dilution
tubes
Chemical analysis
Temperature
temperature

Cite this

Volumetric properties of (piperidine + water) binary system : measurements and modeling. / Afzal, Waheed; Valtz, Alain; Coquelet, Christophe; Richon, Dominique.

In: The Journal of Chemical Thermodynamics, Vol. 40, No. 1, 01.2008, p. 47-53.

Research output: Contribution to journalArticle

Afzal, Waheed ; Valtz, Alain ; Coquelet, Christophe ; Richon, Dominique. / Volumetric properties of (piperidine + water) binary system : measurements and modeling. In: The Journal of Chemical Thermodynamics. 2008 ; Vol. 40, No. 1. pp. 47-53.
@article{59ad11d90b8344818bc3958293d5587e,
title = "Volumetric properties of (piperidine + water) binary system: measurements and modeling",
abstract = "Densities of pure piperidine (CAS No.: 110-89-4) and of its mixtures with water have been measured over the whole range of compositions at temperatures from 283.15 K to 347.15 K using Anton Paar™ digital vibrating tube densimeter. The density of this system has been found increasing with mass fraction of water. Excess molar volumes have been calculated using the measured experimental densities and correlated using the Redlich–Kister equation. Redlich–Kister equation parameters have been adjusted on experimental data. In addition, partial molar volumes and partial excess molar volumes at infinite dilution have been calculated for each component.",
author = "Waheed Afzal and Alain Valtz and Christophe Coquelet and Dominique Richon",
year = "2008",
month = "1",
doi = "10.1016/j.jct.2007.05.009",
language = "English",
volume = "40",
pages = "47--53",
journal = "The Journal of Chemical Thermodynamics",
issn = "0021-9614",
publisher = "Academic Press Inc.",
number = "1",

}

TY - JOUR

T1 - Volumetric properties of (piperidine + water) binary system

T2 - measurements and modeling

AU - Afzal, Waheed

AU - Valtz, Alain

AU - Coquelet, Christophe

AU - Richon, Dominique

PY - 2008/1

Y1 - 2008/1

N2 - Densities of pure piperidine (CAS No.: 110-89-4) and of its mixtures with water have been measured over the whole range of compositions at temperatures from 283.15 K to 347.15 K using Anton Paar™ digital vibrating tube densimeter. The density of this system has been found increasing with mass fraction of water. Excess molar volumes have been calculated using the measured experimental densities and correlated using the Redlich–Kister equation. Redlich–Kister equation parameters have been adjusted on experimental data. In addition, partial molar volumes and partial excess molar volumes at infinite dilution have been calculated for each component.

AB - Densities of pure piperidine (CAS No.: 110-89-4) and of its mixtures with water have been measured over the whole range of compositions at temperatures from 283.15 K to 347.15 K using Anton Paar™ digital vibrating tube densimeter. The density of this system has been found increasing with mass fraction of water. Excess molar volumes have been calculated using the measured experimental densities and correlated using the Redlich–Kister equation. Redlich–Kister equation parameters have been adjusted on experimental data. In addition, partial molar volumes and partial excess molar volumes at infinite dilution have been calculated for each component.

U2 - 10.1016/j.jct.2007.05.009

DO - 10.1016/j.jct.2007.05.009

M3 - Article

VL - 40

SP - 47

EP - 53

JO - The Journal of Chemical Thermodynamics

JF - The Journal of Chemical Thermodynamics

SN - 0021-9614

IS - 1

ER -